We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twenty clear plastic clip-on connectors with 10-foot three-wire leads on a spool

PAUTIX 12mm 3-Pin RGB COB LED Strip Connectors 20pcs 10ft 22AWG

SKU CH-SAV5-674G9

Connects 12 mm 3-pin RGB COB LED strips with 20 solderless connectors and 305 cm 22 AWG extension wires

  • Solderless DIY installation with press-fit connectors
  • 10 ft 22AWG extension wires included for long runs
  • Compatible only with 12 mm 3-pin RGB smart IC COB strips
  • Reuse cut strips through jumper or corner connections
  • Gapless press-fit design prevents poor contact and disconnection

Compatible LED Strip Type

These connectors are made exclusively for 12mm wide 3-pin RGB smart IC COB LED strip lights. They do not fit strips of other widths such as 3mm, 5mm, 8mm or 10mm, nor strips with 2-pin, 4-pin, 5-pin or 6-pin configurations. Installers working with addressable RGB COB strips at 5V, 12V or 24V will find a direct match.

Sustained Connection Reliability

The press-fit design creates a gapless joint that resists poor contact and accidental disconnection during continuous operation. Transparent housings allow visual confirmation of the connection while the 10ft 22AWG extension wires maintain signal integrity across longer runs without the need for additional splicing.

Build Quality and Daily Use

No soldering is required, making the kit suitable for DIY corner jumps, cut-strip reuse and direct controller links. The compact connectors add no light-blocking bulk at corners or splices, and the firm fixation holds shape through repeated handling and repositioning of the strip.

Highlights

  • Solderless DIY installation with press-fit connectors
  • 10 ft 22AWG extension wires included for long runs
  • Compatible only with 12 mm 3-pin RGB smart IC COB strips
  • Reuse cut strips through jumper or corner connections
  • Gapless press-fit design prevents poor contact and disconnection

Specifications

No published specifications for this item yet.

Questions about this item

How much heat does the 22AWG wire generate when the 12mm 3-pin RGB COB strip runs all day?

The 22AWG extension wires carry only the low current drawn by 5V, 12V or 24V addressable strips, so they stay cool to the touch even during continuous operation.

What must I already own to use these 20 press-fit connectors and 10ft of 22AWG wire?

You need a compatible 3-pin 12mm RGB smart IC COB LED strip, a matching addressable controller and a suitable DC power supply for 5V, 12V or 24V operation.

Can I join these connectors to an older 10mm 4-pin RGB strip I already have installed?

No, the press-fit terminals are sized exclusively for 12mm wide 3-pin COB strips and will not fit 10mm, 8mm or any 4-pin variants.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.