Pass & Seymour
Pass & Seymour L530PGCM Ground Monitoring Plug 125VAC 30A
Ground continuity monitoring plug rated 30 A at 125 V AC with screw terminals for cables from .385 to .69 in diameter
- TypeGround Continuity Monitoring
- ColorBlack/White
- Ground monitoring protects against wiring faults
- 30 A rating supports heavy-duty equipment loads
- Nylon housing resists chemicals and impacts
- Accepts cable diameters from .385 to .69 in
- NEMA L5-30P configuration fits locking receptacles
L5-30P Ground Monitoring Plug
The Pass & Seymour L530PGCM is a 30 A ground continuity monitoring plug rated for 125V AC single-phase service. Its three-blade L5-30P configuration suits equipment that requires verified grounding before power is applied.
Sustained load behaviour
The nylon housing provides chemical and impact resistance while meeting federal specification grade requirements. Screw-terminal wire connections accept cables from .385 in to .69 in diameter for secure, repeatable terminations under continuous 30 A operation.
Installation checks
Verify that the supply circuit delivers 125V AC and is protected by a 30 A breaker or fuse. Confirm the mating receptacle is an L5-30R and that the cable outer diameter falls within the .385 in to .69 in range for proper strain relief.
Highlights
- Ground monitoring protects against wiring faults
- 30 A rating supports heavy-duty equipment loads
- Nylon housing resists chemicals and impacts
- Accepts cable diameters from .385 to .69 in
- NEMA L5-30P configuration fits locking receptacles
Specifications
| Brand | Pass & Seymour |
|---|---|
| Model | L530PGCM |
| Type | Ground Continuity Monitoring |
| Color | Black/White |
Questions about this item
How much heat or power does the L530PGCM draw when left plugged in all day?
The plug is a passive device with no internal electronics, so it adds no measurable heat or power draw beyond the load you connect through it.
What cable diameter and wiring tools are needed to install the L530PGCM?
Accepts cables from 0.385 in to 0.69 in outer diameter and uses screw-terminal connections that can be tightened with a standard screwdriver.
Will the L530PGCM work with my existing L5-30R receptacle and older 125 V equipment?
Yes, the NEMA L5-30P blades match any standard L5-30R outlet and the 125 V AC rating suits legacy single-phase gear.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



