Vszerda
Vszerda LM4040 Precision Voltage Reference Module 2.048V 4.096V passive component
$17.99
0.00021476BTC
In stock
Parts Express
Parts Express 27K Ohm 1/2W Metal Oxide Film Resistors 10 Pack
A 10-pack of 27K ohm, 1/2W metal oxide film resistors with flameproof coating and 5% tolerance
- TypeResistors
- Low-noise signal paths from metal oxide film construction
- Flame-resistant coating protects circuits during overload events
- Half-watt power rating suits typical through-hole designs
- Tight five-percent tolerance keeps resistance values predictable
- Ten-piece pack covers multiple board positions or spares
27 kΩ ½ W Metal-Oxide Resistors
This pack contains ten flameproof metal-oxide film resistors rated at 27 kilohms and half a watt. They are aimed at hobbyists, repair technicians and prototype builders who need low-noise through-hole parts for audio, measurement or general signal circuits. Each resistor carries a five percent tolerance and a non-flammable coating.
27 kilohm value and half-watt rating
The single specification that decides fit is the 27 kilohm resistance combined with a ½ watt power rating. A circuit that calls for a different ohm value or a higher dissipation will not work correctly with these parts. The five percent tolerance sets the expected deviation from the nominal value.
Through-hole mounting and circuit space
The axial leads suit standard perfboard, stripboard or PCB holes spaced for ½ watt components. The flameproof coating adds safety in crowded layouts where a fault could generate heat. The ten-piece quantity covers a small project or provides spares for future repairs without requiring a larger assortment kit.
Highlights
- Low-noise signal paths from metal oxide film construction
- Flame-resistant coating protects circuits during overload events
- Half-watt power rating suits typical through-hole designs
- Tight five-percent tolerance keeps resistance values predictable
- Ten-piece pack covers multiple board positions or spares
Specifications
| Type | Resistors |
|---|
Questions about this item
How much power can each 27K Ohm resistor dissipate in a circuit?
Each resistor is rated for 1/2 watt, so it can safely handle up to that power level without overheating.
What does the metal oxide film construction mean for signal quality?
The metal oxide film design provides low noise performance, making these resistors suitable for sensitive audio and measurement circuits.
What physical space do these through-hole resistors need on a board?
They are standard axial leaded components; the flameproof coating adds minimal bulk, so they fit typical 1/2W resistor footprints.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
