We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Parker PKC-1-24 solenoid valve coil 24VAC 60/50 Hz 10W

Parker

Parker PKC-1-24 Solenoid Valve Coil 24VAC 60/50 Hz 10W trap

SKU CH-H59F-30YPS

Replacement solenoid coil operates on 24 VAC at 50/60 Hz and 10 W for Parker drain valves

  • TypeDrain Components
  • MaterialHAWA
  • 24VAC dual-frequency coil fits 50 Hz and 60 Hz systems
  • 10W power rating keeps energy use low during operation
  • Certified to CE CSA UL and ISO 9001 2000 standards
  • Compatible with Grainger part numbers 11X605 11X606 and 29AH series
  • Replaces manufacturer models R52E3511 and R52E359 directly

Parker PKC-1-24 solenoid coil purpose

The Parker PKC-1-24 is a 24 VAC solenoid valve coil designed for drain and trap assemblies in plumbing systems. It suits installers and maintenance teams who need a direct replacement coil operating on standard 50/60 Hz supplies. Buyers requiring DC voltage or higher power ratings cannot use this model.

10 W capacity and duty limits

Rated at 10 W, the coil delivers sufficient pull-in and holding force for compatible Parker valve bodies under continuous duty. It runs out of margin when system voltage drifts beyond the 24 VAC nominal value or when ambient temperatures exceed the coil’s insulation class. No higher-wattage version is offered in this series.

CE CSA UL listed compliance change

The coil carries CE, CSA, UL Listed and ISO 9001:2000 markings, confirming conformity to recognised safety and quality standards. These certifications allow specification in regulated commercial and industrial projects without additional component validation. No software or accessories are bundled with the coil.

Highlights

  • 24VAC dual-frequency coil fits 50 Hz and 60 Hz systems
  • 10W power rating keeps energy use low during operation
  • Certified to CE CSA UL and ISO 9001 2000 standards
  • Compatible with Grainger part numbers 11X605 11X606 and 29AH series
  • Replaces manufacturer models R52E3511 and R52E359 directly

Specifications

TypeDrain Components
MaterialHAWA
BrandParker
ModelPKC-1-24

Questions about this item

Will the 24 VAC coil operate correctly on an older valve body rated for 50 Hz only?

The coil is rated for both 50 Hz and 60 Hz at 24 VAC, so it will run on a legacy 50 Hz valve body without frequency mismatch.

How can I confirm the coil is energised after wiring it to the control circuit?

With 24 VAC applied you should hear a clear mechanical click and feel the plunger pull in; a multimeter across the coil terminals will show roughly 10 W of power draw.

Does the package include mounting hardware or a connector, or must I source them separately?

Only the solenoid coil itself is supplied; mounting screws, wiring connectors and any required gaskets must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.