Parker
Parker K352077 N Series Solenoid Pilot Seal Kit 3/4 In
Seal kit for solenoid pilot valves in N series air compressors, 3/4 inch size
- Parker N Series solenoid pilot seal kit
- 3/4 inch port size for direct fit
- Complete kit restores valve sealing performance
- Genuine Parker part number 352077
- New condition ensures reliable air system operation
Parker K352077 N Series Seal Kit
This Parker K352077 seal kit is designed for N Series solenoid pilot valves with a 3/4 inch port size. It provides the replacement seals required to service the pilot assembly on compatible air compressor or vacuum pump systems. The kit contains the specific components needed to restore sealing integrity in the pilot section. Maintenance technicians use this kit during scheduled overhauls or when addressing pilot leaks.
Upgrading Worn Pilot Seals
This kit replaces deteriorated or damaged seals inside the N Series solenoid pilot valve. It is the correct choice when the pilot function becomes unreliable due to seal wear, extrusion, or chemical attack. The jump is worth it when troubleshooting points to the pilot section rather than the main valve body or external piping. It is not for repairing main valve seals, actuator pistons, or valve bodies from other series or manufacturers.
Capacity and Service Limits
The kit supplies the precise seals specified for the 3/4 inch N Series pilot assembly, matching the original material and dimensions for that interface. It comfortably handles the pressure and media conditions defined for the original valve rating. It runs out when the pilot bore, solenoid sleeve, or mounting surfaces show damage beyond what new seals can compensate for, requiring full valve replacement instead.
Highlights
- Parker N Series solenoid pilot seal kit
- 3/4 inch port size for direct fit
- Complete kit restores valve sealing performance
- Genuine Parker part number 352077
- New condition ensures reliable air system operation
Specifications
| Brand | PARKER |
|---|
Questions about this item
Will the Parker K352077 seal kit fit my N Series 3/4 In solenoid pilot valve?
Yes, the Parker K352077 is a dedicated seal kit manufactured for N Series solenoid pilot valves with a 3/4 In port size.
How do I install the Parker K352077 seal kit and what step is often missed?
Depressurise the system, remove the pilot assembly, replace all O-rings and gaskets from the kit, then torque the body to spec; the step often missed is lubricating the new seals with compatible grease before assembly.
How often should I replace the seals in the Parker K352077 kit on an N Series valve?
Replace the seals during scheduled preventive maintenance or at the first sign of pilot leakage; heavy cycling or contaminated air shortens the interval.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
