We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Parker 304 steel filter dryer 1/2 SAE flare 10 ton capacity

Parker

Parker 304 liquid line filter dryer 10 ton 1/2 SAE flare

SKU CH-BMTP-HMJX8

Filters moisture from liquid refrigerant lines using 100 percent molecular sieve, rated for 10 ton capacity with R-22 and R-410A, and connects via 1/2 inch SAE flare fittings

  • Filters all common refrigerants with 100 % molecular sieve
  • Handles 10 ton capacity for both R-22 and R-410A systems
  • 1/2 inch SAE flare connections for secure leak-free fit
  • Compact 8 inch cut-out length suits tight service spaces
  • Durable steel shell rated for high-pressure HVAC lines

Parker 304 filter dryer for 10 ton systems

The Parker 304 liquid line filter dryer is built for HVAC technicians servicing residential and light-commercial refrigeration circuits rated up to 10 tons. It removes moisture and solid contaminants from all CFC, HCFC and HFC refrigerants including R-22 and R-410A. The steel shell houses a 100 percent molecular sieve core for reliable long-term protection.

SAE flare connections simplify field installation

The 1/2 inch SAE flare fittings allow technicians to make leak-free joints with standard wrenches without brazing equipment. A cut-out length of 8 inches and an overall length of 9 15/16 inches fit common service valves, but tight cabinets may require offset adapters. Over-tightening the flare nuts can distort the soft copper seating surface and cause refrigerant leaks.

Rated for 10 ton R-22 and R-410A capacity

The filter dryer handles 10 tons of cooling capacity for both R-22 and R-410A refrigerants, providing ample headroom for typical split systems and packaged units. Systems exceeding 10 tons or operating with higher-pressure blends will exceed the rated flow and moisture removal capability, requiring a larger core or parallel installation.

Highlights

  • Filters all common refrigerants with 100 % molecular sieve
  • Handles 10 ton capacity for both R-22 and R-410A systems
  • 1/2 inch SAE flare connections for secure leak-free fit
  • Compact 8 inch cut-out length suits tight service spaces
  • Durable steel shell rated for high-pressure HVAC lines

Specifications

BrandPARKER

Questions about this item

How can I verify the Parker 304 filter dryer is working correctly after installation?

Check that system pressures stabilise within normal ranges for the refrigerant charge and that sight-glass moisture indicator shows dry refrigerant after the unit has run for a suitable period.

What components are included with the Parker 304 filter dryer and what must be purchased separately?

The filter dryer body with 1/2 inch SAE flare connections is supplied; flare nuts, copper tubing, refrigerant and any required brazing or sealing materials are not included.

Which capacity version of the Parker 304 should I select for my system?

Choose this 10 ton model when the design cooling capacity matches 10 tons for R-22 or R-410A; the 100 percent molecular sieve core handles both refrigerant types at that rating.

More in HVAC Controls

Similar items

Same shelf, same checkout — eight coins and a 30-minute rate lock.