PANORAMA ANTENNAS, INC.
PANORAMA ANTENNAS DWMM4-6-60-5SP 4x4 MiMo 4G/5G Antenna 4x5m SMA
Omnidirectional 4x4 MIMO LTE antenna covers 600-6000 MHz for 4G/5G with IP66 rating and four 5m SMA cables
- Typenetworking
- 4x4 MiMo boosts 4G/5G throughput across 617-6000 MHz
- Four 5 m low-loss cables with SMA plugs connect directly to router
- IP66-rated white radome withstands -40 to 85 °C outdoors
- Medium gain of 3.5-7 dBi peak improves signal quality
- Wall, mast or desk mount fits diverse installations
4×4 MiMo 4G/5G antenna for fixed wireless
The Panorama Antennas DWMM4-6-60-5SP is an omnidirectional 4×4 MiMo LTE antenna built for 4G and 5G networks. It covers 617 to 6000 MHz with medium gain from 3.5 to 7 dBi peak. The white radome carries an IP66 rating for outdoor deployment. Four 5 m low-loss cables with SMA plugs connect directly to a compatible router.
Check router ports and mounting location
Verify that your router provides four SMA antenna ports before ordering. Ensure a suitable wall, mast or desk mounting point is available with a clear view of the sky. The antenna operates from -40 to 85 °C so confirm the local climate stays within that range. The unit accepts up to 10 W input power.
Steady gain across a wide band
The antenna maintains its 3.5 to 7 dBi gain across the full 617 to 6000 MHz span rather than peaking in a narrow slice. IP66 sealing keeps performance stable during prolonged rain or dust exposure. Low-loss 5 m cables preserve signal quality over the full run to the router. The omnidirectional pattern delivers consistent reception without re-aiming.
Highlights
- 4x4 MiMo boosts 4G/5G throughput across 617-6000 MHz
- Four 5 m low-loss cables with SMA plugs connect directly to router
- IP66-rated white radome withstands -40 to 85 °C outdoors
- Medium gain of 3.5-7 dBi peak improves signal quality
- Wall, mast or desk mount fits diverse installations
Specifications
| Type | networking |
|---|
Questions about this item
What cables and connectors are included with the DWMM4-6-60-5SP antenna, and is any additional hardware needed for installation?
The antenna ships with four 5 m low-loss cables, each terminated with an SMA plug that connects directly to a compatible router. Mounting brackets for wall, mast or desk installation are included; no extra cables or adapters are required.
How do I choose between the available connector types for this antenna?
This specific model is supplied with SMA connectors only. If your router uses FAKRA or N-Type ports you would need a different variant or suitable adapters, which are not included.
What real-world signal improvement can I expect from the 3.5 to 7 dBi peak gain on a 4G/5G router?
The medium gain of 3.5 to 7 dBi across the 617–6000 MHz range typically adds several decibels of received signal strength over a router’s internal antennas, helping maintain higher data rates and more stable connections, especially at cell edge or in buildings with thick walls.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
vtech VC7002 open/closed sensor surveillance security system
- Home Improvement



