We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bare copper ring terminal, 6 AWG, 1/4 in stud, brazed seam, 200 pack

Panduit

Panduit Ring Terminal 6 AWG 1/4 in Stud Brazed Seam 200 Pack

SKU CH-DGFS-4SG3M

Copper ring terminals accept 6 AWG wire, fit 1/4 in studs, and meet UL486A-486B and CSA C22.2 No. 65 standards in a 200-piece pack

  • MaterialHAWA
  • CSA & UL certified for code-compliant installations
  • Brazed seam resists splitting under heavy crimp loads
  • 6 AWG copper handles high-current automotive circuits
  • 1/4 in stud fits common terminal blocks and bus bars
  • 200-piece bulk pack reduces per-connection cost

6 AWG Ring Terminal 200 Pack

This pack supplies two hundred bare copper ring terminals sized for 6 AWG conductors and a quarter-inch stud. They suit automotive, marine and industrial wiring jobs where a secure crimp connection is required.

Capacity and headroom

Each terminal accepts a single 6 AWG wire and is rated for up to 2,000 volts and 302 °F. The brazed seam holds together under vibration, but the bare barrel offers no insulation so a separate sleeve or heat-shrink is needed for exposed runs.

Bundled accessories

The box contains only the two hundred terminals; no crimp tool, heat-shrink tubing or insulation sleeves are included. Users must provide their own crimper matched to 6 AWG and any additional protection the installation demands.

Highlights

  • CSA & UL certified for code-compliant installations
  • Brazed seam resists splitting under heavy crimp loads
  • 6 AWG copper handles high-current automotive circuits
  • 1/4 in stud fits common terminal blocks and bus bars
  • 200-piece bulk pack reduces per-connection cost

Specifications

BrandPanduit
MaterialHAWA

Questions about this item

Will the 1/4 in stud on these 6 AWG terminals fit the same bolts I use with older 8 AWG lugs?

Yes — the 1/4 in stud size is identical, so existing bolts and bus bars will accept the new terminals without re-drilling.

How can I verify the crimp is solid once I install a terminal?

After crimping, tug the wire firmly; a proper joint holds 6 AWG copper without movement, and the brazed seam stays closed up to 302 °F.

Does the 200-piece pack include any heat-shrink tubing or crimp tool?

The box contains only the bare copper ring terminals; insulation and a suitable crimp tool must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.