Panduit
Panduit PN10-8R-D 12-10 AWG Nylon Ring Terminal #8 Stud Yellow 500 Pack
Nylon-insulated ring terminals for 12-10 AWG wire with #8 stud, 600 V rating and 221 °F maximum temperature, supplied in a 500-piece pack
- MaterialHAWA
- Connects 12-10 AWG wire with #8 stud
- Nylon insulation rated to 221 Degrees F
- 600 V maximum voltage for safe operation
- Crimp connection meets CSA 22.2 No. 65 and UL 486 standards
- 500 terminals per pack for high-volume jobs
Panduit #8 Ring Terminal 500-Pack
These nylon-insulated ring terminals accept 12 to 10 AWG wire and fit a #8 stud. The copper connection uses a crimp method with a seam grip sleeve. They meet CSA C 22.2 No. 65, MS25036-156 Class 1 and 2, and UL486A-486B standards. The insulation is yellow and rated to 221 degrees F.
Suits installers needing bulk #8 stud crimp
Technicians who require a different stud size or wire gauge should select another part. Users needing solder connections instead of crimp will not be served. Projects demanding insulation rated above 221 degrees F must look elsewhere.
12 to 10 AWG wire range decides fit
This specification determines whether the terminal matches the conductor size in your application. The #8 stud and yellow nylon insulation are fixed attributes that follow from the wire range. Confirm your wire gauge before ordering.
Highlights
- Connects 12-10 AWG wire with #8 stud
- Nylon insulation rated to 221 Degrees F
- 600 V maximum voltage for safe operation
- Crimp connection meets CSA 22.2 No. 65 and UL 486 standards
- 500 terminals per pack for high-volume jobs
Specifications
| Brand | PANDUIT |
|---|---|
| Material | HAWA |
Questions about this item
What is the maximum temperature the 12-10 AWG ring terminal can withstand during continuous operation?
The nylon-insulated terminal is rated for a maximum temperature of 221 degrees Fahrenheit under sustained use.
How much heat does the crimp connection generate when conducting at its 600 V rating all day?
The copper crimp barrel creates minimal resistance, so heat rise stays low during continuous 600 V operation.
Which crimp tool and die are required to install these #8 stud terminals correctly?
A crimper approved for 12-10 AWG Panduit terminals with the matching die set is needed for a proper connection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Unique-Bargains 2-Position Speaker Terminal Block 2 Pcs
- HI - Wire & Cable C…



