Panduit
Panduit FTD80-10-TL 14 AWG Wire Ferrule Blue PK250
Pack of 250 blue insulated 14 AWG wire ferrules with tin-plated copper barrels, 9/16 in insertion length, rated to 221 °F and meeting UL 486F, CSA C22.2 No. 291 and DIN 46228
- Tin-plated copper barrel resists corrosion
- Blue polypropylene insulation identifies 14 AWG wire size
- 9/16 in insertion length suits standard terminal blocks
- UL 486F and CSA 22.2 No. 291-14 listed for code compliance
- Pack of 250 ferrules supports high-volume wiring jobs
Blue 14 AWG ferrules for generator wiring
These Panduit FTD80-10-TL ferrules terminate 14 AWG copper conductors in generator and electrical-supply applications. Each piece has a blue polypropylene sleeve, a tin-plated copper barrel and a 9/16 in insertion length. The pack contains 250 ferrules for volume termination work.
Replaces loose or tinned wire ends in terminal
Crimping these ferrules onto 14 AWG wire eliminates stray strands and creates a gas-tight connection that meets CSA C22.2 No. 291-14, DIN 46228 and UL 486F. The upgrade is worth it when vibration or thermal cycling would degrade bare-wire terminations over time.
Handles 14 AWG exclusively
The 0.13 in ferrule diameter and 0.34 in barrel length match 14 AWG only; they will not accept larger or smaller conductors. The polypropylene insulation is rated to 221 °F, so the ferrules remain reliable in high-ambient generator environments.
Highlights
- Tin-plated copper barrel resists corrosion
- Blue polypropylene insulation identifies 14 AWG wire size
- 9/16 in insertion length suits standard terminal blocks
- UL 486F and CSA 22.2 No. 291-14 listed for code compliance
- Pack of 250 ferrules supports high-volume wiring jobs
Specifications
| Brand | PANDUIT |
|---|
Questions about this item
What insulation length and barrel diameter does the 14 AWG blue ferrule need for a proper crimp?
The ferrule has a 9/16 in insertion length and a 0.15 in barrel diameter, so the wire strip length must match the insertion depth and the crimp die must suit the barrel size.
Which crimp profile and die size are correct for the tin-plated copper barrel on this Panduit ferrule?
Use a crimp tool rated for 14 AWG ferrules with a profile that matches the 0.15 in barrel diameter; the common mistake is using a standard wire-terminal die instead of a dedicated ferrule die.
When should the polypropylene-insulated ferrules be replaced if they are used near the 221 °F temperature limit?
Inspect the blue insulation for discolouration, brittleness or cracking; any sign of heat damage means the ferrule must be replaced to maintain a reliable connection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
