Panduit
Panduit FSD79-8-D Ferrule 14 AWG Yellow 15/32in PK500
Yellow insulated copper ferrules for 14 AWG wire, tin-plated barrels, 15/32 in insertion, CSA and DIN compliant, pack of 500
- Tin-plated copper barrel resists corrosion for reliable connections
- Yellow polypropylene insulation identifies 14 AWG wire size at a glance
- 15/32 in insertion length ensures consistent crimp depth every time
- CSA C22.2 No. 291-14 and DIN 46228 Part 4 compliance confirms tested safety
- Pack of 500 ferrules supports high-volume wiring projects
14 AWG Yellow Wire Ferrules
These 14 AWG yellow wire ferrules are designed for crimp termination on solid or stranded copper conductors. The tin-plated copper barrels ensure reliable electrical contact and corrosion resistance. Polypropylene insulation provides dielectric protection up to 221 degrees Fahrenheit. They suit panel builders and electricians terminating control wiring to DIN rail terminals.
Crimp Installation with Standard Tooling
Installation requires a ratchet crimp tool matched to the 14 AWG barrel diameter of 0.14 inches and barrel length of 0.26 inches. The 15/32 inch insertion length must be fully seated in the terminal block to achieve the rated connection. Common errors include using pliers instead of a proper crimper, which yields loose strands, and stripping insulation too short for the ferrule barrel.
500-Piece Pack for Control Panels
A pack of 500 ferrules supports high-volume panel wiring jobs and provides spare parts for maintenance. The yellow colour coding follows standard 14 AWG identification for quick visual verification during assembly. The tin-plated copper barrel handles typical control-circuit currents within the 221 degree Fahrenheit temperature limit. They are not suited for wire gauges larger or smaller than 14 AWG.
Highlights
- Tin-plated copper barrel resists corrosion for reliable connections
- Yellow polypropylene insulation identifies 14 AWG wire size at a glance
- 15/32 in insertion length ensures consistent crimp depth every time
- CSA C22.2 No. 291-14 and DIN 46228 Part 4 compliance confirms tested safety
- Pack of 500 ferrules supports high-volume wiring projects
Specifications
| Brand | PANDUIT |
|---|
Questions about this item
How can I verify the crimped connection is correct?
Check that the tin-plated copper barrel is fully seated on the stripped 14 AWG conductor and that the yellow polypropylene insulation sleeve covers the crimp area.
What comes in the package and what else is needed?
The pack contains 500 yellow 14 AWG ferrules with 15/32 in insertion length; a compatible crimp tool for tin-plated copper barrels must be purchased separately.
Which standard should I match for my panel build?
These ferrules meet CSA C22.2 No. 291-14 and DIN 46228 Part 4, so choose them when either of those standards is specified for 14 AWG terminations.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
