Panasonic
Panasonic CR2016/F2N 3 V Lithium Coin Cell with Tabs Box of 36
Box of 36 Panasonic CR2016 lithium coin cells with SMD tabs, 3 V and 90 mAh each, operating from -30 °C to 60 °C
- Battery TypeCR2016
- Reliable power for compact devices with 3 V lithium chemistry
- Extended storage life up to 10 years reduces replacement frequency
- Operates from -30 °C to 60 °C for harsh environments
- SMD tabs enable direct PCB mounting without holders
- Box of 36 cells supports volume production or service stock
Panasonic CR2016 coin cell with tabs
Panasonic CR2016/F2N is a 3 V lithium coin cell supplied with two surface-mount tabs in a box of 36. It fits devices that require a CR2016 footprint and solder-in connection rather than a holder. The termination style suits automated assembly or hand soldering onto a PCB.
Replaces loose CR2016 cells without tabs
The tabbed version replaces bare CR2016 cells when a direct board connection is needed. The jump is worth it when the design calls for SMD mounting, vibration resistance or a permanent power path without a battery holder. Buyers who need a holder-compatible cell or a different diameter cannot use this part.
Solder-tab interface limits
The two opposite-direction tabs dictate the PCB footprint and prevent use in standard coin-cell holders. Operating range spans -30 °C to 60 °C, so extreme environments beyond those limits need a different chemistry. Shelf life reaches 10 years, after which voltage stability may decline.
Highlights
- Reliable power for compact devices with 3 V lithium chemistry
- Extended storage life up to 10 years reduces replacement frequency
- Operates from -30 °C to 60 °C for harsh environments
- SMD tabs enable direct PCB mounting without holders
- Box of 36 cells supports volume production or service stock
Specifications
| Battery Type | CR2016 |
|---|
Questions about this item
Will the 20 mm by 1.6 mm cells with opposite-direction tabs fit my PCB footprint?
Each cell measures 20 mm diameter by 1.6 mm height and has two tabs extending in opposite directions; verify your board layout matches that pin spacing before soldering.
What is the correct orientation when hand-soldering the tabs to avoid reversing polarity?
The tabs are pre-formed in opposite directions; the positive tab is marked on the cell can — align it with the PCB silkscreen before applying heat to prevent a reversed connection.
After how many years should I expect to replace the unused cells from the 36-piece box?
Panasonic rates the shelf life at up to 10 years when stored within the -30 °C to 60 °C operating range; plan replacement once that period is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



