We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray epoxy adhesive in a 1.0 oz syringe with dual chambers

Pacer

Pacer SUPER GLUE 15212 Epoxy Adhesive Syringe 1.0 oz Gray 24 hr

SKU CH-05Q9-4FRA0

Epoxy adhesive in a 1.0 oz syringe, gray, cures in 24 hours with 2,500 PSI shear strength

  • TypeSealing Compound
  • 24-hour full cure for permanent bonds
  • 4–6 minute work life allows precise positioning
  • 2,500 PSI shear strength handles structural loads
  • 40 °F to 300 °F temperature range suits extreme environments
  • Drillable, tappable and fileable after curing

Product identity

This is a two-part epoxy adhesive supplied in a 1.0 oz syringe for precise dispensing. The gray formulation suits repair and bonding tasks on metal, plastic, wood and composite materials.

Build and dispensing

The syringe format delivers a 1:1 mix ratio directly at the joint, eliminating separate measuring and reducing mess. Once fully cured the material can be drilled, tapped or filed, and it withstands temperatures from -40 to 300 degrees Fahrenheit.

Working window and cure

A work life of 4 to 6 minutes demands quick positioning before the adhesive begins to set. Full structural strength of 2,500 PSI shear is reached after 24 hours, so the assembly must remain undisturbed for that period.

Highlights

  • 24-hour full cure for permanent bonds
  • 4–6 minute work life allows precise positioning
  • 2,500 PSI shear strength handles structural loads
  • 40 °F to 300 °F temperature range suits extreme environments
  • Drillable, tappable and fileable after curing

Specifications

TypeSealing Compound
BrandSUPER GLUE

Questions about this item

Does the 1:1 mixing ratio in the syringe limit bond strength compared to two-part epoxies?

The 1:1 ratio is pre-measured inside the dual-chamber syringe; shear strength reaches 2,500 psi after full cure.

What surface preparation ensures the gray epoxy fills gaps and can be drilled after 24 hours?

Clean and roughen surfaces, dispense equal beads from both chambers, mix thoroughly, apply within 4 to 6 minutes, clamp if needed, wait 24 hours before drilling or tapping.

Why does the epoxy remain workable for only 4 to 6 minutes yet require 24 hours before machining?

Work life of 4 to 6 minutes allows positioning; full cross-linking to 2,500 psi shear strength and temperature resistance from -40 to 300 °F completes at 24 hours.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.