We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel strapping coil 5/8 inch wide 0.023 inch thick 300 feet long

Pac Strapping Products

Pac Strapping Products Steel Strapping 5/8 in .023 in 1690 lb 300 ft

SKU CH-7FH6-NR3HZ

Black steel strapping, 5/8 in wide and .023 in thick, with 1690 lb break strength on a 300 ft ribbon-wound coil

  • TypePacking Peanuts & Fillers
  • ColorBlack
  • 5/8 in width secures heavy loads
  • .023 in thickness resists snapping
  • 1690 lb break strength holds pallets firm
  • 300 ft ribbon length reduces reloads
  • Ribbon wind feeds smoothly on standard tools

5/8 in steel strapping

This 5/8 in wide steel strapping has a thickness of .023 in and a break strength of 1690 lb. The coil supplies 300 ft of ribbon-wound material in black. It is new and AAR approval is not applicable.

Portable standard-duty bundling

The strapping suits portable standard-duty bundling and palletizing where high tensile strength is required. Operations that need AAR-approved coil or a different width or thickness should look at other options.

Sustained tension handling

Under sustained load the steel maintains its 1690 lb break rating without the elongation seen in polymer alternatives. Ribbon winding allows consistent pay-off during extended strapping cycles.

Highlights

  • 5/8 in width secures heavy loads
  • .023 in thickness resists snapping
  • 1690 lb break strength holds pallets firm
  • 300 ft ribbon length reduces reloads
  • Ribbon wind feeds smoothly on standard tools

Specifications

TypePacking Peanuts & Fillers
BrandZORO SELECT
ColorBlack

Questions about this item

What tensioning tool or sealer is required for the 5/8 in .023 in steel strapping?

You need a standard-duty tensioner and sealer rated for 5/8 inch width and .023 inch thickness to apply this strapping correctly.

Can the 1690 lb break strength strapping be used with older manual tensioners?

Yes, manual tensioners designed for 5/8 inch wide, .023 inch thick steel strapping will work with this 1690 lb break strength coil.

How can I confirm the strapping meets the 1690 lb break strength after sealing?

A properly sealed joint holds the full 1690 lb break strength; inspect seals for complete notch formation and no slippage under load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.