Oz Lifting Products
Oz Lifting Products Electric Winch OZACW 115V AC 1 hp 12 fpm 1,200 lb
Electric winch lifts 1,200 lb at 12 fpm with a 1 hp, 115V AC motor and 189:1 spur gears, operated by a 10 ft pendant control
- 12 fpm line speed keeps work moving
- 1 hp motor delivers steady pulling power
- 1,200 lb capacity handles heavy loads
- 115 V AC supply plugs into standard power
- 10 ft pendant cord gives operator space
What this winch does
The Oz Lifting Products electric winch delivers 1,200 lb of pulling capacity on the first layer at a line speed of 12 fpm. It runs on 115V AC power with a 1 hp motor drawing up to 10 A. The unit uses a single-speed spur gearbox with a 189:1 ratio and has no clutch mechanism. A 10 ft pendant controller provides wired operation.
Installation and common issues
The winch body is steel with enclosed gears and requires secure mounting to a structure rated for the load. Wiring must supply 115V AC at up to 10 A with proper grounding and circuit protection. The pendant cord reaches 10 ft from the unit. Because there is no clutch, the drum cannot be free-spooled; line must be powered out or pulled manually against motor resistance.
Limits of the 115V AC single-speed design
Operation is tied to a standard 115V AC outlet, so the winch cannot run from a vehicle battery or DC source. The single speed and fixed gear ratio mean line speed and torque cannot be adjusted for different tasks. With no clutch, rapid line deployment is not possible. The 10 ft controller cord restricts operator distance unless an extension is used. Continuous duty cycles are limited by the AC motor’s thermal protection.
Highlights
- 12 fpm line speed keeps work moving
- 1 hp motor delivers steady pulling power
- 1,200 lb capacity handles heavy loads
- 115 V AC supply plugs into standard power
- 10 ft pendant cord gives operator space
Specifications
| Brand | Oz Lifting Products |
|---|
Questions about this item
How can I verify the winch is operating correctly after installation?
Run the pendant control and confirm the line moves at 12 fpm on the first layer while lifting up to 1,200 lb without the motor stalling at 10 A draw.
What comes in the box and what must I purchase separately?
The unit includes the enclosed-gear steel body with 10 ft pendant cord; compatible wire rope is not supplied and must be bought separately.
Which version should I choose for a 115 V AC supply and 1,200 lb first-layer capacity?
This single-speed 1 hp model with 189:1 spur gears is the only version matching 115 V AC, 12 fpm line speed and 1,200 lb capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
