We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Tan fiberglass pipe insulation tube slit with adhesive flap

Owens Corning

Owens Corning 200268 Pipe Insulation Trap 2-5/8 in ID 1-1/2 in Wall 3 ft

SKU CH-5G9J-6WFGJ MPN 200268

Fiberglass pipe insulation tube with adhesive slit and ASJ facing covers 2-5/8 in copper pipe, rated 0 to 1000 Degrees F with R-8.9

  • TypeDrain Components
  • MaterialHAWA
  • ColorTan
  • Fiberglass insulation withstands up to 1,000 °F continuous heat
  • Slit tube with adhesive flap speeds installation on 2-5/8 in copper
  • ASJ facing meets 25 flame spread and 50 smoke developed ratings
  • R-8.9 thermal resistance reduces energy loss on hot or cold lines
  • Plenum-rated material approved for air-handling spaces

Pipe Insulation Trap 2-5/8 in ID

This Owens Corning pipe insulation trap fits copper tube size 2-5/8 inches with a 1-1/2 inch wall thickness. The three-foot fiberglass tube carries an R-value of 8.9 and operates from 0 to 1,000 degrees Fahrenheit. It is plenum rated with a flame spread index of 25 and smoke developed index of 50.

Slit Adhesive Flap Installation Style

The slit design with adhesive and flap allows the insulation to wrap around existing pipe without disconnecting the line. ASJ facing provides a durable vapor retarder and finished appearance. The fiberglass material maintains its thermal performance across the full temperature range.

Lightweight Fiberglass Tube Handling

The three-foot length is manageable for one person to position and secure. Adhesive flap closure eliminates separate tape or fasteners in most installations. Ensure the pipe surface is clean and dry before pressing the flap to achieve a continuous seal.

Highlights

  • Fiberglass insulation withstands up to 1,000 °F continuous heat
  • Slit tube with adhesive flap speeds installation on 2-5/8 in copper
  • ASJ facing meets 25 flame spread and 50 smoke developed ratings
  • R-8.9 thermal resistance reduces energy loss on hot or cold lines
  • Plenum-rated material approved for air-handling spaces

Specifications

TypeDrain Components
MaterialHAWA
ColorTan
BrandOwens Corning
Model200268

Questions about this item

Will the fiberglass insulation with ASJ facing need periodic replacement once installed?

The fiberglass material and ASJ facing are designed for long service life within the 0 to 1,000 Degrees F operating range, so no periodic replacement is expected under normal conditions.

What temperature limit is reached first during continuous high-heat exposure?

The maximum operating temperature is 1,000 Degrees F, which is the upper limit before material performance could be affected.

How much heat does the insulation radiate when the pipe runs at high temperature all day?

With an R-value of 8.9 and 1-1/2 inch wall thickness, the insulation significantly reduces surface temperature and heat loss even during sustained high-temperature operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.