METRA 82-SU1 speaker adapter and wire harness kit 6.5-6.75 in car electronics accessory
- Speaker Spacers
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Orion
A 6.5" midrange speaker pair handles 300W RMS and 1200W peak with a neodymium magnet and 1.5" CCAW voice coil
This Orion XTR-654NEO pair delivers 6.5-inch midrange output built for high-volume car audio systems. Two slim speakers handle 300W RMS each with a 1200W peak rating. The 4-ohm impedance and 91.7dB sensitivity suit amplifiers that can supply clean power in that range. Buyers needing deep bass below 128Hz or tweeter detail above 10kHz should add dedicated drivers.
Frequency response spans 128Hz to 10kHz, so these units cover midrange only and will not reproduce sub-bass or high treble. The 4-ohm load and 91.7dB/W/m sensitivity mean moderate amplifier power reaches high output, but the narrow band requires crossovers to protect the cones. Systems expecting full-range performance from a single driver will find the limits obvious.
A neodymium magnet and 1.5-inch high-temperature CCAW voice coil keep the motor light and heat-resistant behind a black paper cone. The manufacturer notes a wide basket that may require slight modification to fit standard 6.5-inch openings. Installers should verify mounting depth and cut-out diameter before committing to the install.
| Brand | Orion |
|---|---|
| Type | Speaker |
| Speaker Size | 6.5" |
| Model | XTR-654NEO |
| Vehicle Type | Automotive |
| Color | Black |
| Peak Power | 1200W |
| RMS Power | 300W |
| Sensitivity | 91.7dB/W/M |
| Frequency Response | 128HZ-10KHZ |
| Impedance | 4 Ohm |
The product is sold as a pair of two 6.5" midrange speakers, giving you both left and right channels in one purchase.
Each speaker handles 300W RMS continuously, so an amplifier delivering roughly 300W per channel at 4 ohms will match the thermal limits without clipping.
At 4 ohms each, the pair presents a 4 ohm load per channel; wiring them in parallel would drop the load to 2 ohms, which many amplifiers do not support stably.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?