Orico
Orico M2PJH M.2 NVMe SATA Enclosure USB-C 10Gbps 2230-2280 Aluminum
Tool-free aluminum enclosure holds one M.2 NVMe or SATA SSD (2230-2280) and connects via USB-C at 10 Gbps
- ColorGray
- TypeEnclosure
- MaterialAluminum
- External InterfaceUSB Type C
- HDD Count SupportedSingle SSD
- Number of Bay1 Bay
- Cable-free USB-C design creates a portable SSD drive
- 10Gbps transfer speed with NVMe drives via USB 3.2 Gen2
- Supports M.2 sizes 2230, 2242, 2260 and 2280
- Tool-free installation enables quick SSD swaps without tools
- Aluminum alloy shell delivers fast thermal conductivity for cooling
Portable NVMe SATA Enclosure
The Orico M2PJH is a compact aluminium enclosure that turns a single M.2 drive into a portable USB-C storage device. It accepts both NVMe and SATA protocol SSDs in 2230, 2242, 2260 and 2280 form factors. Tool-free installation means the drive slides in and locks without screws. The grey alloy shell doubles as a heatsink for passive cooling during extended transfers.
Upgrade From Slower External Drives
This enclosure replaces USB 3.0 or SATA-to-USB adapters that cap at 5 Gbps or 6 Gbps respectively. The jump is worth it when moving large project files, disk images or full system backups where the 10 Gbps NVMe path cuts wait time noticeably. SATA M.2 drives still operate at their native 6 Gbps limit through the same bridge. It does not suit builders who need internal RAID or multi-bay capacity.
Single Drive Up To 4 TB
The single-bay design comfortably handles consumer SSDs up to 4 TB for operating-system clones, media libraries or bootable diagnostics. Headroom runs out when workflows demand simultaneous access to multiple drives or sustained writes beyond what one controller and passive cooling can sustain. USB-A and USB-C cables are included for broad host compatibility.
Highlights
- Cable-free USB-C design creates a portable SSD drive
- 10Gbps transfer speed with NVMe drives via USB 3.2 Gen2
- Supports M.2 sizes 2230, 2242, 2260 and 2280
- Tool-free installation enables quick SSD swaps without tools
- Aluminum alloy shell delivers fast thermal conductivity for cooling
Specifications
| Color | Gray |
|---|---|
| Type | Enclosure |
| Material | Aluminum |
| External Interface | USB Type C |
| HDD Count Supported | Single SSD |
| Number of Bay | 1 Bay |
Questions about this item
What M.2 lengths does the enclosure accept?
The enclosure supports 2230, 2242, 2260 and 2280 form factors.
How is the SSD secured inside the enclosure without tools?
A tool-free latch holds the drive in place; the common mistake is not pressing the latch fully until it clicks.
Does the aluminum shell need any thermal pads replaced over time?
No replaceable pads are used; the solid aluminum body acts as the heatsink and requires no maintenance.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
