Onsrud
Onsrud 37-07 engraving tool carbide 0.030 in 60 degree
A carbide engraving tool with a 60-degree tip and 0.030-inch width for precise marking
- TypeHole, Drill, Bore & Wire Gauges
- Carbide construction resists wear for long tool life
- 60-degree tip cuts precise V-grooves in metal
- 030-inch diameter suits fine detail engraving work
- Uncoated carbide keeps cutting edges sharp on hard materials
- Single-piece design simplifies setup in CNC machines
Engraving tool for fine detail work
The Onsrud 37-07 is a carbide engraving tool with a 0.030 inch tip and a 60 degree included angle. It is intended for machinists and hobbyists who need to cut narrow grooves or mark parts with precision. The single-flute, uncoated design suits manual or CNC engraving on metal, plastic or wood.
Tip diameter decides the cut width
The cutting diameter is 0.0300 in, so the tool produces a very fine line suited to lettering, serial numbers or ornamental detail. A larger tip would widen the groove and reduce resolution; a smaller tip would be more fragile. Select this size only when the design calls for a 0.030 in feature width.
Shank fits standard half-inch holders
The tool has a 1/2 in shank that drops into common ER collets, end-mill holders or drill chucks without adapters. Carbide is brittle, so excessive run-out or heavy feed rates can snap the tip. Use light passes, adequate coolant and a rigid setup to avoid breakage.
Highlights
- Carbide construction resists wear for long tool life
- 60-degree tip cuts precise V-grooves in metal
- 030-inch diameter suits fine detail engraving work
- Uncoated carbide keeps cutting edges sharp on hard materials
- Single-piece design simplifies setup in CNC machines
Specifications
| Brand | Onsrud |
|---|---|
| Type | Hole, Drill, Bore & Wire Gauges |
Questions about this item
What does the 0.030 in tip width mean for the engraved line?
The 0.030 in tip produces a fine line width suitable for detailed marking on metal or plastic.
How does the 60 degree included angle affect the cut profile?
The 60 degree angle creates a V-groove with steeper walls than a 30 degree tool, giving deeper, narrower cuts.
What shank size fits this carbide engraving tool?
The tool has a 1/2 in shank diameter for standard collet holders.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
