OEM Industries
OEM Industries WEJ55B5 9225 92*25mm AC 100V 9/7.5W 2-Wire industrial cooling fan
92 × 25 mm AC fan runs on 100 V at 50/60 Hz, drawing 9/7.5 W through two wires for cabinet or UPS cooling
- Voltage100 V
- Hz50/60 Hz
- 92 mm square frame fits standard 9225 cut-outs
- 100 V AC input matches 50/60 Hz mains supplies
- 9 W at 50 Hz and 7.5 W at 60 Hz for efficient airflow
- Two-wire connection simplifies installation in cabinets and UPS units
- Metal housing provides rigid mounting for continuous industrial use
Industrial AC Cooling Fan
The OEM Industries WEJ55B5 is a square 92 mm frame fan designed for 100 V AC supply at 50/60 Hz. It draws 9 W at 50 Hz and 7.5 W at 60 Hz and is built with a metal housing for continuous industrial use. Two wires provide the electrical connection for straightforward wiring into equipment.
Two-Wire Integration
The fan requires a 100 V AC source and mounts using the standard 92 mm hole pattern. Its metal frame adds rigidity in vibration-prone cabinets and UPS enclosures. The 25 mm thickness fits shallow ducts while the two-wire lead simplifies installation without a separate controller.
Suited for Fixed 100 V Systems
This unit suits technicians maintaining 100 V AC cabinets, servers or UPS units that need a direct-replacement axial fan. Buyers who need variable speed control, DC voltage operation or a different frame size should look at alternative models.
Highlights
- 92 mm square frame fits standard 9225 cut-outs
- 100 V AC input matches 50/60 Hz mains supplies
- 9 W at 50 Hz and 7.5 W at 60 Hz for efficient airflow
- Two-wire connection simplifies installation in cabinets and UPS units
- Metal housing provides rigid mounting for continuous industrial use
Specifications
| Model | WEJ55B5 |
|---|---|
| Voltage | 100 V |
| Hz | 50/60 Hz |
Questions about this item
How long can the WEJ55B5 run continuously at 100 V before the motor reaches its thermal limit?
The fan is rated for 50/60 Hz operation at 100 V with a power draw of 9 W at 50 Hz and 7.5 W at 60 Hz; sustained use stays within those limits as long as airflow around the 92 mm metal frame is not restricted.
What noise and heat levels should I expect when the WEJ55B5 runs all day in a cabinet?
The 92×25 mm frame moves air at the rated 9/7.5 W without additional cooling; audible noise is typical for a 92 mm AC fan and heat dissipates through the metal housing when mounted with clearance.
What power connection must already be present for the WEJ55B5 to operate?
A 100 V AC supply at 50 or 60 Hz with a two-wire lead is required; the fan has only two wires and no onboard controller, so the circuit must provide the correct voltage and frequency directly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
