OEM Industries
OEM Industries MiRO RGS4 63A 660V cartridge fuse 10 pcs
Pack of ten 63 A 660 V cartridge bolt fuses for low-voltage circuit protection
- TypeIndustrial UPS & Surge Supression Device Accessori
- Pack of ten fuses simplifies bulk maintenance
- 63 A rating handles high-current circuits safely
- 660 V rating suits demanding industrial voltage levels
- IEC compliance confirms recognised safety standards
- Cartridge bolt design enables secure, tool-free installation
Product identity
This lot contains ten MiRO RGS4 cartridge fuses rated at 63 amps and 660 volts. They are industrial aR type devices intended for low-voltage UPS and surge suppression circuits. The fuses comply with IEC safety standards and are supplied new in a single pack of ten pieces.
Compatibility checks
Verify that the equipment you are protecting specifies a 63 A aR cartridge fuse with a 660 V rating before fitting these units. Confirm the physical dimensions and bolt mounting pattern match the existing fuse holders in your UPS or surge suppression gear. Ensure the prospective short-circuit current at the installation point falls within the fuse's rated breaking capacity.
Sustained load behaviour
The aR characteristic provides fast operation under high fault currents while tolerating normal load surges without nuisance opening. During prolonged overloads the element will melt to interrupt the circuit, protecting downstream semiconductors and wiring. After any interruption the fuse must be replaced; it cannot be reset and reused.
Highlights
- Pack of ten fuses simplifies bulk maintenance
- 63 A rating handles high-current circuits safely
- 660 V rating suits demanding industrial voltage levels
- IEC compliance confirms recognised safety standards
- Cartridge bolt design enables secure, tool-free installation
Specifications
| Type | Industrial UPS & Surge Supression Device Accessori |
|---|
Questions about this item
What comes in the pack and is anything else needed?
The pack contains ten MiRO RGS4 cartridge bolt fuses rated at 63 A and 660 V; no additional parts are required for basic replacement.
How do I choose the right version for my circuit?
Select the RGS4 model rated 63 A / 660 V when your low-voltage circuit requires that exact current and voltage rating under IEC standards.
What does the 63 A rating mean once the fuse is installed?
It means the fuse will carry up to 63 amperes continuously and open the circuit if the current exceeds that value, protecting wiring and equipment at up to 660 volts.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
