OEM Industries
OEM Industries CNL 675A 675A DC48V AC125V RQD-1 line protection
675 amp circuit protector rated for 48 V DC and 125 V AC automotive systems
- TypeCircuit Protectors
- Amps675
- High-current protection up to 675 amps for heavy-duty circuits
- Dual-voltage rating handles 48 V DC and 125 V AC systems
- CNL series circuit protector designed for automotive line protection
- RQD-1 form factor fits standard car fuse blocks
- New condition ensures reliable performance from first installation
CNL 675A DC48V/AC125V fuse
This CNL 675A circuit protector is a line-protection fuse rated at 675 amps for DC 48 volt and AC 125 volt systems. It is built for automotive and generator circuits that require high-current overcurrent protection in a single device. The RQD-1 designation marks the specific fuse style for compatible holders. New condition ensures full-rated performance from installation.
For high-current DC and AC circuits
Installers protecting battery banks, inverter feeds or generator output up to the rated voltage and amperage will find this fuse matches the specification. It is not for circuits exceeding 48 volts DC or 125 volts AC, nor for applications needing a lower ampere rating or a different fuse form factor. Buyers who need a time-delay characteristic not confirmed here should verify suitability before purchase.
675 ampere rating at dual voltage
The decisive figure is the 675 ampere rating combined with the DC 48 volt and AC 125 volt limits. If the circuit current or voltage differs from these values, this fuse will not provide correct protection. Confirm the exact amperage and voltage requirements of the installation before selecting this part.
Highlights
- High-current protection up to 675 amps for heavy-duty circuits
- Dual-voltage rating handles 48 V DC and 125 V AC systems
- CNL series circuit protector designed for automotive line protection
- RQD-1 form factor fits standard car fuse blocks
- New condition ensures reliable performance from first installation
Specifications
| Series | CNL 675A |
|---|---|
| Model | CNL 675A |
| Type | Circuit Protectors |
| Amps | 675 |
Questions about this item
What fuse block or holder does the CNL 675A fuse fit?
It is a CNL-series blade fuse rated 675 amps for DC 48 V and AC 125 V, designed for CNL fuse blocks that accept this blade style.
How do I install the CNL 675A fuse and what step is often missed?
Remove power, open the fuse block cover, pull the old CNL fuse straight out, insert the new CNL 675A fuse fully until seated, then close the cover before restoring power.
When should the CNL 675A fuse be replaced?
Replace it after it has blown from an over-current event, or if the blade terminals show discolouration, pitting or corrosion during routine inspection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
