OATEY
OATEY 30821 PVC Cement 8 oz White
Low-VOC solvent cement joins ABS, CPVC and PVC pipe up to six inches in a brush-top can
- TypeCaulks, Sealants & Gasket Makers
- Size8 oz
- Low-VOC formula meets ASTM D2235, D2564 and D493 standards
- Bonds ABS, CPVC and PVC pipe up to 6 in diameter
- Brush-top can applies cement cleanly in two-minute working window
- Full cure reached in six minutes for fast pressure testing
- Operates reliably from 40 °F to 110 °F for year-round jobs
PVC Cement for ABS CPVC PVC
Oatey 30821 is an all-purpose solvent cement formulated for drain, waste and vent piping as well as potable water systems. The brush-top can delivers a controlled coating on pipe diameters up to six inches. Working time is two minutes with full cure in six minutes.
Low VOC White Formula
The white cement meets ASTM D2235, ASTM D2564 and ASTM F493 standards along with BAAQMD Method 40 for low volatile organic compound content. Viscosity ranges from zero to five hundred centipoise. It remains usable between forty and one hundred ten degrees Fahrenheit.
Not for Pressurised Systems Beyond Spec
Builders needing higher pressure ratings or larger diameter joints must select a cement certified for those conditions. The product is not intended for applications outside the listed standards or temperature range.
Highlights
- Low-VOC formula meets ASTM D2235, D2564 and D493 standards
- Bonds ABS, CPVC and PVC pipe up to 6 in diameter
- Brush-top can applies cement cleanly in two-minute working window
- Full cure reached in six minutes for fast pressure testing
- Operates reliably from 40 °F to 110 °F for year-round jobs
Specifications
| Brand | OATEY |
|---|---|
| Type | Caulks, Sealants & Gasket Makers |
| Size | 8 oz |
Questions about this item
Which pipe standard does the cement meet for CPVC and PVC joints?
It meets ASTM D2235, ASTM D2564 and ASTM F493 for ABS, CPVC and PVC up to six inches diameter.
What container style does the 8 oz cement use and how does it apply?
The brush-top can includes a built-in brush so you coat pipe and fitting directly without extra tools.
What is the working time once the cement is applied before the joint must be assembled?
You have about two minutes of working time at 40 to 110 degrees F before the cement starts to set.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
