Nylglo
Nylglo Oklahoma Flag 144380 5x8 Ft Nylon
Oklahoma state flag in 200-denier nylon, 5 by 8 feet with header and grommets for poles at least 30 feet tall
- TypeOutdoor Decor
- Oklahoma state flag for indoor or outdoor display
- Digital single/reverse image printed on 200 denier nylon
- Header and grommets for secure flagpole attachment
- 5 ft by 8 ft size suited to 30 ft minimum pole
- New Annin Flagmakers construction built for lasting colour
Oklahoma State Flag 5x8 Ft
The Nylglo Oklahoma flag measures five feet by eight feet and is made from 200 denier nylon for indoor or outdoor display. It carries the digital single-reverse image of the state seal and is finished with a header and brass grommets for secure attachment. The flag is designed for poles at least thirty feet high and suits homes, schools, or municipal buildings flying the state colours.
Weather Resistance and Handling
The 200 denier nylon construction resists fading and mildew while remaining light enough to fly in gentle breezes. Its single-reverse print means the design reads correctly on the front and mirrors on the back, reducing weight and wind load on the pole. No powered components or moving parts are involved, so there is no noise or electrical draw to consider.
Mounting Hardware Included
A reinforced canvas header and rust-resistant brass grommets come sewn into the flag, allowing immediate installation on any standard flag staff or pole without extra purchases. The supplied hardware matches the flag’s dimensions and material, so no separate snap hooks, rings, or rope kits are required for basic flying. Buyers needing a taller pole, lighting, or a rotating truck will have to source those separately.
Highlights
- Oklahoma state flag for indoor or outdoor display
- Digital single/reverse image printed on 200 denier nylon
- Header and grommets for secure flagpole attachment
- 5 ft by 8 ft size suited to 30 ft minimum pole
- New Annin Flagmakers construction built for lasting colour
Specifications
| Brand | ANNIN FLAGMAKERS |
|---|---|
| Type | Outdoor Decor |
Questions about this item
How do I attach the 5 ft. by 8 ft. Oklahoma flag to a pole, and what step is often missed?
Slide the flag staff through the header and secure both grommets; the step people miss is fastening the bottom grommet so the flag cannot slide up in wind.
What part of this 200 denier nylon flag will need replacement first?
The header stitching and brass grommets wear out before the nylon field; inspect them each season and replace the flag when the header frays or a grommet pulls through.
At what wind load does the 30 ft. minimum pole requirement become the limiting factor?
The 30 ft. minimum pole height is specified so the flag clears ground turbulence; in sustained high winds a shorter pole lets the flag snap against the pole, tearing the header first.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
