We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Translucent natural nylon tubing, 10 mm OD, 100 ft coil

Nycoil

Nycoil 10 mm OD Nylon Tubing Natural 100 ft

SKU CH-AYYD-54XH3

10 mm OD nylon tubing delivers 100 ft of natural-colour line rated to 200 psi at 68 °F with a 660 psi burst pressure and –4 °F to 175 °F temperature range

  • 100 ft continuous run reduces fittings
  • 200 psi working pressure at 68 °F handles demanding lines
  • Nylon Shore D 60 resists abrasion and chemicals
  • 4 °F to 175 °F range suits hot and cold fluids
  • 28 in Hg vacuum rating supports suction applications

10 mm Nylon Tubing for Fluid Systems

This 100-foot coil of natural-colour nylon tubing has a 10 mm outside diameter and an 8 mm inside diameter. The Shore D 60 hardness gives a semi-rigid feel that resists kinking during routing. It suits pneumatic, lubrication and low-pressure hydraulic lines in automotive and light-industrial settings.

Pressure and Temperature Limits

The tubing is rated for 200 psi working pressure at 68 °F with a 660 psi burst pressure and a 28 in Hg vacuum rating. Continuous use spans -4 °F to 175 °F, so exposure beyond this range will degrade performance. Pressure capacity falls as temperature rises, so derate accordingly for hot-fluid applications.

10 mm Outside Diameter Fit

The 10 mm OD with a 1/32 inch wall and a tolerance of +0.002 / -0.004 inch determines compatibility with push-to-connect fittings and compression ferrules. Verify that your fittings accept this exact OD before purchase; the tube will not seal in fittings sized for 3/8 inch or other nominal dimensions.

Highlights

  • 100 ft continuous run reduces fittings
  • 200 psi working pressure at 68 °F handles demanding lines
  • Nylon Shore D 60 resists abrasion and chemicals
  • 4 °F to 175 °F range suits hot and cold fluids
  • 28 in Hg vacuum rating supports suction applications

Specifications

BrandZORO SELECT

Questions about this item

Should I choose the 100 ft coil or a shorter length for my pneumatic circuit?

The 100 ft coil lets you cut exact runs for 10 mm OD push-to-connect fittings without joins, reducing leak paths in compressed-air or fluid lines.

What does the 200 psi rating mean once the tubing is installed on a machine running at 68 °F?

At 68 °F the tubing handles 200 psi continuous working pressure; above that temperature the allowable pressure drops, so derate for hotter environments.

How does the Shore D 60 hardness and 1/32 in wall affect the minimum bend radius and kink resistance?

Shore D 60 nylon with a 1/32 in wall gives a tight bend radius for 10 mm OD tubing while resisting kinks in tight routing, and holds vacuum to 28 in Hg.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.