NUOLAISUN
NUOLAISUN 17.3" laptop screen FHD 30 Pins 60Hz M50442-001
17.3 inch FHD replacement panel with 30-pin connector and 60Hz refresh for compatible HP 17-CN models
- FHD resolution on a 17.3 inch panel
- 60 Hz refresh rate for smooth motion
- 30-pin connector matches original HP part M50442-001
- Non-touch design keeps weight and cost down
- Compatible with HP 17-CN series models including 17-CN0023DX and 17-CN3033CL
Replacement Screen for HP 17-CN Series
This 17.3-inch FHD panel replaces the original display in compatible HP 17-CN laptops. It uses a 30-pin connector and runs at 60 Hz. The non-touch LCD is intended for owners of listed models such as 17-CN0023DX, 17-CN0033DX and 17-CN2063CL who need a direct swap.
Build and Connector Details
The screen ships as a bare LCD panel without hinges, bezel or webcam module. Its 30-pin data cable must match the motherboard header exactly; a pin-count mismatch will prevent any image. Professional installation is advised because power and battery cables must be disconnected before fitting the new panel.
Thermals and Power in Use
As a passive LCD component the panel generates no audible noise and adds negligible heat to the chassis. Power draw is limited to the backlight and driver circuitry, which the original laptop power system already supports. No additional cooling or power-budget changes are required after installation.
Highlights
- FHD resolution on a 17.3 inch panel
- 60 Hz refresh rate for smooth motion
- 30-pin connector matches original HP part M50442-001
- Non-touch design keeps weight and cost down
- Compatible with HP 17-CN series models including 17-CN0023DX and 17-CN3033CL
Specifications
No published specifications for this item yet.
Questions about this item
Does the 30-pin connector support FHD resolution at 60 Hz?
Yes, the panel is specified for FHD resolution and a 60 Hz refresh rate over its 30-pin interface.
Will this 17.3" screen fit the mounting brackets in an HP 17-CN series chassis?
It is listed as a direct replacement for multiple HP 17-CN models including 17-CN0023DX, 17-CN0033DX and 17-CN2063CL, so the mounting points match those chassis.
What is the correct installation sequence to avoid damaging the new panel?
Disconnect the power adapter and remove the battery cable before fitting the screen; the package contains only the LCD panel and no instructions.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



