NUOLAISUN
NUOLAISUN 16" WQXGA Touchscreen for Lenovo IdeaPad Flex 5 16ALC7 82RA003UUS 5D10S39795
A 16-inch WQXGA touchscreen replacement for Lenovo IdeaPad Flex 5 16ALC7, matching part numbers 5D10S39795 and 82RA003UUS
- 16″ WQXGA touchscreen restores vivid visuals on Flex 5 16ALC7
- Exact 5D10S39795 part match guarantees drop-in compatibility
- 82RA003UUS model alignment prevents fitment errors
- Brand-new panel ships ready for professional installation
- Fragile glass handled with care to arrive intact
16" WQXGA Touch Replacement
This 16-inch WQXGA touchscreen is a direct replacement panel for the Lenovo IdeaPad Flex 5 16ALC7. It matches the original part numbers 5D10S39795 and 82RA003UUS. Buyers who need a non-touch panel or a different connector layout cannot use this screen.
Upgrades cracked or dead panels
The screen replaces a damaged LCD or a failed digitiser on the same chassis. The jump is worth it when the existing glass is shattered, the backlight has failed or touch input no longer registers. Swapping to a lower resolution or a non-touch variant would lose the factory WQXGA clarity and pen support.
Fits the Flex 5 16ALC7 hinge assembly
Installation requires disconnecting the battery and power adapter before fitting the bare LCD module into the existing bezel. No extra cables or brackets are included. Builders without microsoldering tools or a clean workspace should seek professional fitting to avoid flex-cable damage.
Highlights
- 16″ WQXGA touchscreen restores vivid visuals on Flex 5 16ALC7
- Exact 5D10S39795 part match guarantees drop-in compatibility
- 82RA003UUS model alignment prevents fitment errors
- Brand-new panel ships ready for professional installation
- Fragile glass handled with care to arrive intact
Specifications
No published specifications for this item yet.
Questions about this item
What connector does the 16-inch WQXGA touchscreen use to fit the Lenovo IdeaPad Flex 5 16ALC7?
The replacement screen matches the original 30-pin eDP interface used by the 16ALC7 chassis, so the flex cable plugs straight into the motherboard socket without an adapter.
Which step do installers most often miss when fitting this touchscreen into the Flex 5 16ALC7?
Forgetting to disconnect both the power adapter and the internal battery cable before removing the bezel, which can short the eDP pins or the touch controller.
What component will need replacement if the touch layer on this 5D10S39795 panel fails later?
The digitiser is bonded to the LCD, so a touch fault means swapping the complete 16-inch WQXGA touchscreen assembly again.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



