NUOLAISUN
NUOLAISUN 16.1" QHD 2560×1440 165Hz 40-pin laptop screen M54741-001 M62235-001
16.1-inch QHD 2560×1440 165 Hz non-touch LCD panel with 40-pin connector for compatible HP Omen 16 models
- QHD 2560×1440 resolution for sharp detail
- 165 Hz refresh rate for smooth motion
- 1 inch screen size fits compatible laptops
- 40‑pin connector matches original panel spec
- New condition ensures flawless display quality
16.1" QHD 165Hz 40-pin replacement panel
This 16.1-inch LCD panel delivers a 2560×1440 QHD resolution at 165Hz over a 40-pin connector. It is built as a direct replacement for specific HP Omen 16 models including the 16-B0005DX, 16-e0004AX and 16-k0023dx. The part carries manufacturer codes M54741-001 and M62235-001 and matches panel reference NE161QHM-NY1. No touch layer is present.
For repairers matching exact part numbers
Installers who can verify the 40-pin layout, 165Hz refresh and QHD resolution against the original screen will find this panel a direct fit. Buyers who cannot confirm the back-label model, pin count or refresh rate should not order, as mismatched specifications will prevent the display from working. The part ships as the LCD only, without brackets, cables or tools.
QHD 165Hz headroom for fast-paced content
The 2560×1440 grid and 165Hz scan rate give smooth motion in games and video playback on the 16.1-inch diagonal. The fixed 40-pin interface and non-touch construction limit use to laptops wired for that exact signalling; systems expecting a different pin count, touch digitiser or lower refresh panel will not be compatible.
Highlights
- QHD 2560×1440 resolution for sharp detail
- 165 Hz refresh rate for smooth motion
- 1 inch screen size fits compatible laptops
- 40‑pin connector matches original panel spec
- New condition ensures flawless display quality
Specifications
No published specifications for this item yet.
Questions about this item
My laptop uses a 40-pin eDP cable — will this panel connect directly?
The panel is built with a 40-pin interface, so it plugs straight into a matching 40-pin eDP connector on the motherboard.
I am keeping the original 165 Hz 2560×1440 panel as a spare — can I swap between them without changing any settings?
Both panels share the same 16.1-inch size, QHD resolution and 165 Hz refresh rate, so the system will recognise either one without driver or BIOS changes.
After fitting the screen, how do I confirm the 165 Hz mode is actually active?
Open the display settings in Windows, choose the advanced adapter properties and verify the refresh-rate dropdown shows 165 Hz selected.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



