NUOLAISUN
NUOLAISUN 15" MacBook Air M2 A2941 M3 A3114 2023-2024 Starlight laptop screen
15 inch replacement display for MacBook Air M2 A2941 and M3 A3114 models from 2023 and 2024 in Starlight finish
- Designed for MacBook Air M2 A2941 and M3 A3114 models
- Covers 2023 and 2024 production years
- Matches EMC 8301, 8612 and 9301 part numbers
- Complete top assembly in Starlight finish
- LCD display ready for professional installation
15″ Replacement Screen for MacBook Air M2 and M3
This 15-inch LCD top assembly replaces the display on MacBook Air models A2941 (EMC 8301) and A3114 (EMC 9301, EMC 8612). It matches part numbers MQKU3LL/A and MQKV3LL/A for the 2023-2024 Starlight finish. The screen is supplied as a complete display unit only, not a full laptop.
Professional installation required
The fragile glass panel demands careful handling and the battery cable must be disconnected before fitting. Buyers must verify the exact model, resolution, pin count and part numbers on the original screen label before ordering. Incorrect selection will cause incompatibility and the screen will not display.
Replaces a cracked or faulty original display
The upgrade is worthwhile when the existing panel is damaged or shows artefacts and the part numbers match exactly. It is not suitable for other MacBook sizes, earlier generations, different colour finishes or touch-screen variants. Always confirm the back-label data with the seller before purchase.
Highlights
- Designed for MacBook Air M2 A2941 and M3 A3114 models
- Covers 2023 and 2024 production years
- Matches EMC 8301, 8612 and 9301 part numbers
- Complete top assembly in Starlight finish
- LCD display ready for professional installation
Specifications
No published specifications for this item yet.
Questions about this item
Does the 15-inch display use the same connector pin-out as the original A2941 panel?
The replacement matches the factory cable pin count for the A2941 and A3114 models; verify the back-label numbers before fitting.
What tools and clearances are required to mount the complete top assembly?
You need a Pentalobe driver, Torx bits, and enough bench space to lay the lid flat while routing the battery and display cables.
Which cable must be disconnected first during installation to avoid a short?
Disconnect the battery cable before touching the display flex; skipping this step is the most common cause of a dead backlight.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



