NUOLAISUN
NUOLAISUN 15.6 inch 1920x1080 144Hz 40Pins laptop screen for MSI Katana GF66 MS-1581 MS-1582
A 15.6 inch 1920x1080 144Hz non-touch LCD panel with a 40-pin connector for MSI Katana GF66 MS-1581 and MS-1582 models
- 6 inch Full HD panel gives sharp visuals
- 144 Hz refresh rate delivers smooth motion
- 40-pin connector matches original MSI Katana GF66 screens
- Compatible with MS-1581 and MS-1582 chassis variants
- Non-touch LED display keeps replacement simple
15.6 inch 1920x1080 144Hz panel
This new NUOLAISUN replacement screen matches the 15.6 inch 1920x1080 144Hz specification used in MSI Katana GF66 MS-1581 and MS-1582 chassis. It arrives as a bare LCD panel with a 40-pin connector and no touch digitiser. Professional installation is required because the battery and power adapter must be disconnected before fitting. The package contains the screen only.
For non-touch GF66 11UC 11UD 11UE 11UG 11SC models
The panel suits owners of the listed Katana GF66 sub-models who need a direct non-touch replacement. Buyers with touch-enabled assemblies or a different pin count should look elsewhere because the connector and digitiser layout will not match. Anyone unwilling to perform a professional-grade installation involving battery removal should also consider an authorised repair service instead.
40-pin non-touch connector
The single specification that decides fitment is the 40-pin non-touch interface. If the original screen uses a different pin arrangement or includes a touch digitiser, this panel will not connect. Verify the part number on the back of the old screen before ordering.
Highlights
- 6 inch Full HD panel gives sharp visuals
- 144 Hz refresh rate delivers smooth motion
- 40-pin connector matches original MSI Katana GF66 screens
- Compatible with MS-1581 and MS-1582 chassis variants
- Non-touch LED display keeps replacement simple
Specifications
No published specifications for this item yet.
Questions about this item
Will the 40-pin connector and 15.6 inch dimensions fit my MSI Katana GF66 MS-1581 or MS-1582 chassis?
The panel is built to the 15.6 inch 1920x1080 144Hz specification with a 40-pin interface that matches the MS-1581 and MS-1582 models listed for the Katana GF66 series.
What is the critical step when installing this replacement screen?
Disconnect both the power adapter and the battery cable before starting the swap; the supplier stresses professional installation and supplies no instructions.
What should I do if the screen arrives with a defect or I ordered the wrong part?
Do not unseal or damage the packaging; contact the seller first with a photo of the original screen's back label to arrange a resolution.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



