We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
14 inch WUXGA touch screen for HP Envy x360 14-FA 14-fc

NUOLAISUN

NUOLAISUN 14.0" WUXGA 1920x1200 touch screen for HP Envy x360 14-FA 14-fc N91012-001 N91013-001

SKU CH-P9R0-GWDPJ

14.0 inch WUXGA 1920x1200 touch screen replacement for HP Envy x360 14-FA and 14-fc models with part numbers N91012-001 and N91013-001

  • WUXGA 1920×1200 touch display for crisp visuals
  • 0 inch screen fits HP Envy x360 14-FA and 14-fc models
  • Replaces part numbers N91012-001 and N91013-001 exactly
  • New LCD assembly, not compatible with 2.8k OLED panels
  • Professional installation required — disconnect power and battery cables first

Compatible HP Envy x360 models

This 14.0" WUXGA touch screen replaces the display on HP Envy x360 2-in-1 models 14-FA and 14-fc including 14-fa0013dx 14-fa0023dx 14-fc0023dx 14-FC0033DX 14-fc0013dx. It matches part numbers N91012-001 and N91013-001. The panel is not compatible with 2.8k OLED variants. Buyers who need a non-touch panel or a different resolution cannot use this assembly.

Thermals noise and power in normal use

The LCD assembly draws power from the laptop's internal supply and adds no separate fan or cooling requirement. Heat output matches the original screen so thermal behaviour stays unchanged. Silent operation is maintained because the part has no moving components. Installers must disconnect the power adapter and battery cable before fitting the screen.

Build fit and freedoms

The package contains the LCD screen only; no laptop chassis or extra cables are supplied. Professional installation is recommended because the ribbon cable pin count and connector orientation must match the original. Once fitted the touch function and 1920x1200 resolution are restored without further configuration. Builders who lack disassembly experience should seek qualified help.

Highlights

  • WUXGA 1920×1200 touch display for crisp visuals
  • 0 inch screen fits HP Envy x360 14-FA and 14-fc models
  • Replaces part numbers N91012-001 and N91013-001 exactly
  • New LCD assembly, not compatible with 2.8k OLED panels
  • Professional installation required — disconnect power and battery cables first

Specifications

No published specifications for this item yet.

Questions about this item

How do I install this 14.0" touch screen on my HP Envy x360 14-FA without damaging the flex cable?

Disconnect the battery cable and power adapter before starting. Remove the bezel carefully, unplug the video cable from the old panel, connect it to the N91012-001 screen, then test before reassembling.

What maintenance will this WUXGA 1920x1200 replacement screen need over time?

No scheduled maintenance is required. Keep the touch surface clean with a microfibre cloth and avoid pressure on the glass. If the backlight dims or touch fails years later, the whole assembly must be replaced.

What limit appears first during sustained use of this 1920x1200 LCD panel?

The 14.0" LCD's backlight brightness will gradually decrease over many thousands of hours. Touch sensitivity remains stable unless the digitiser layer is physically damaged.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.