We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Handheld CCTV tester with 7 inch IPS touchscreen and multiple output ports

NShi

NShi CCTV Camera Tester 7in IPS 1920x1200 6K IP CVBS PoE 48V PTZ HDMI Out

SKU CH-K2PF-PHGEB

Tests IP cameras up to 6K and analog CVBS cameras with PoE 48V output on a 7 inch IPS touchscreen

  • TypeOther
  • 7 inch IPS touch screen shows crisp 1920x1200 detail
  • Tests IP cameras up to 6K and standard analog CVBS signals
  • Built-in PoE 48V plus DC 5V, 12V, 24V outputs power cameras directly
  • RS485 port analyses PTZ protocols for precise pan-tilt-zoom control
  • 7000mAh battery delivers 6 to 10 hours of field testing

7-inch IPS touchscreen tester for IP

The NShi CCTV Camera Tester combines a 1920 × 1200 IPS touchscreen with a 7000 mAh 7.4 V rechargeable battery. It tests IP cameras up to 6K resolution and standard CVBS analog cameras. The unit supplies PoE 48 V plus DC 5 V, 12 V and 24 V outputs to power cameras during installation. HDMI output at 1080P allows external monitoring.

Battery runtime and fanless operation

The built-in 7000 mAh polymer lithium battery delivers six to ten hours of continuous testing on a single charge. No active cooling is mentioned, so the device runs silently in normal use. Power draw varies with the selected DC or PoE output used to supply the camera under test.

On-board tools and Android openness

An IP discovery tool scans the network segment and can auto-adjust the tester IP address. RS485 receive, send and analyse functions support PTZ protocol analysis. H.265, H.264 and MPEG4 main stream decoding is included. The open Android platform permits installation of additional apps, while built-in browser and manual provide offline reference. Snapshot capture with eight-level image modification aids documentation. The unit does not test AHD, CVI, TVI or SDI cameras and lacks HDMI input.

Highlights

  • 7 inch IPS touch screen shows crisp 1920x1200 detail
  • Tests IP cameras up to 6K and standard analog CVBS signals
  • Built-in PoE 48V plus DC 5V, 12V, 24V outputs power cameras directly
  • RS485 port analyses PTZ protocols for precise pan-tilt-zoom control
  • 7000mAh battery delivers 6 to 10 hours of field testing

Specifications

TypeOther

Questions about this item

How do I power an IP camera directly from the tester and what setting do people forget?

Connect the camera to the RJ45 port and enable the 48V PoE output in the menu; the tester also supplies DC 5V, 12V and 24V for non-PoE models

Which battery cell will need replacing after heavy field use and how long does a full charge last?

The built-in 7000 mA 7.4 V polymer lithium pack runs for 6 to 10 hours per charge and is the only user-replaceable power component

What is the first limit reached when running continuous PoE 48V and screen brightness at maximum?

Battery runtime drops to the lower end of the 6 to 10 hour range because PoE output and the 1920×1200 IPS display draw the most power

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.