NShi
NShi BTY-M6H 3ICR19/65-2 laptop battery 10.8V 41.4Wh 3834mAh
A 10.8 V lithium-ion replacement battery delivering 41.4 Wh for compatible MSI GE, GP and GL series laptops
- Battery TypeLithium Polymer
- 8V 41.4Wh capacity powers compatible MSI laptops
- 3834mAh lithium-ion cell replaces BTY-M6H part
- Fits GE62 GE72 GP62 GP72 GL62 GL72 series
- New condition ensures reliable out-of-box performance
- Charge cycle guidance helps maintain long-term health
Compatible MSI Series
This replacement battery fits MSI GE62, GE72, GP62, GP72, GL62, GL72, PE60 and PE70 notebooks alongside MS-16J1 through MS-16J6 and MS-1792, MS-1795, MS-1796 chassis. It replaces part number BTY-M6H 3ICR19/65-2 and delivers 10.8V output for direct swap-in.
Daily Runtime Behaviour
The lithium-polymer pack rated at 41.4Wh and 3834mAh supplies steady power through extended work or gaming sessions without the voltage sag seen in aged cells. Conditioning the pack with three full charge cycles down to roughly 10% remaining helps the fuel gauge stay accurate over months of use.
Pre-Installation Checks
Verify your exact model appears in the supported list above and that the original battery carries the BTY-M6H 3ICR19/65-2 part number. Ensure the laptop charges correctly with the AC adapter before fitting the new pack, and store the replacement above 80% charge if installation is delayed.
Highlights
- 8V 41.4Wh capacity powers compatible MSI laptops
- 3834mAh lithium-ion cell replaces BTY-M6H part
- Fits GE62 GE72 GP62 GP72 GL62 GL72 series
- New condition ensures reliable out-of-box performance
- Charge cycle guidance helps maintain long-term health
Specifications
| Battery Type | Lithium Polymer |
|---|
Questions about this item
Does the BTY-M6H 3ICR19/65-2 generate noticeable heat during long sessions?
The lithium-polymer cell runs at 10.8 V and 41.4 Wh, producing only modest warmth under normal load.
Must my MSI laptop already have the original BTY-M6H part installed for this replacement to fit?
Yes — it is a direct swap for part numbers BTY-M6H and 3ICR19/65-2 in the listed GE, GP, GL, PE and MS-series chassis.
Will this battery work alongside the original charger on an older MSI GE62?
It matches the factory 10.8 V specification, so the existing power brick charges it normally.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



