NShi
NShi ADP-180MB K 19.5V 9.23A 180W 5.5*2.5mm laptop replacement part
180 W 19.5 V power adapter with 5.5 mm × 2.5 mm tip for compatible MSI GS63 laptops
- 180W output powers demanding MSI gaming laptops
- 5V 9.23A matches original adapter specifications exactly
- 5mm x 2.5mm DC connector fits listed MSI models
- AC 100-240V input works worldwide without a voltage converter
- Over-current over-voltage short-circuit protection safeguards the laptop
Power for MSI GS63VR models
This 180W AC adapter replaces the original ADP-180MB K unit for several MSI GS63VR Stealth Pro laptops. It delivers 19.5V at 9.23A through a 5.5mm by 2.5mm barrel connector and includes a US power cord. The input range covers AC 100V to 240V at 50Hz to 60Hz for worldwide use.
Suits owners of listed GS63VR units
Buyers with a compatible part number such as A15-180P1A or S93-0404330-D04 can use this adapter directly. It is not for laptops that require a different output voltage, a higher current rating or an alternative connector size. Machines outside the listed MSI GS63VR series should not use this power supply.
Connector size decides fit
The DC plug measures 5.5mm outer diameter by 2.5mm inner diameter, matching the Chicony, Delta and MSI 19.5V 9.23A 180W specification. If the original adapter uses a different pin geometry this unit will not connect. Verify the connector dimensions against the old part before ordering.
Highlights
- 180W output powers demanding MSI gaming laptops
- 5V 9.23A matches original adapter specifications exactly
- 5mm x 2.5mm DC connector fits listed MSI models
- AC 100-240V input works worldwide without a voltage converter
- Over-current over-voltage short-circuit protection safeguards the laptop
Specifications
No published specifications for this item yet.
Questions about this item
How do I install the ADP-180MB K charger and what step do people often miss?
Connect the 5.5*2.5mm DC plug firmly into the laptop power port, plug the supplied US power cord into the adapter's AC inlet, then into a 100-240V wall outlet; the step often missed is verifying the connector size matches the original before powering on.
What maintenance or replacement will this 180W adapter need later?
The US power cord and the DC cable can wear from repeated bending; inspect them periodically and replace the cord if the insulation cracks or the connector becomes loose, as the adapter itself has no user-serviceable parts.
What limit appears first when this 19.5V 9.23A unit runs under sustained load?
The over-current and over-voltage protection circuits will trip if the draw exceeds 180W or the input voltage leaves the 100-240V range, shutting the adapter down until the fault clears.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



