NShi
NShi 7.2V 2200mAh Ni-MH laptop battery for TAIT TP8100 TP8110 TP8115 TP8120 TP8135 TP8140 TP9300 TP9400
7.2V 2200mAh Ni-MH replacement battery compatible with TAIT TP8100, TP8110, TP8115, TP8120, TP8135, TP8140, TP9300 and TP9400 radios
- Battery TypeLithium Polymer
- Replaces original batteries for TAIT TP8100 series radios
- Ni-MH chemistry delivers 7.2V 2200mAh capacity
- 84Wh energy rating supports extended field use
- Compact 85.70 x 47.90 x 69.62mm form fits device bay
- Compatible with OEM part numbers T03-00011-CAAA and TPK-BA-101
Replacement battery for TAIT TP8100 series
This Ni-MH pack delivers 7.2 volts and 2200mAh capacity, matching the original T03-00011-CAAA, TPA-BA-100, TPK-BA-100, TPK-BA-101 and TT35L1-D part numbers. It fits the TP8100, TP8110, TP8115, TP8120, TP8135, TP8140, TP9300 and TP9400 radios. The 15.84Wh energy rating supports typical duty cycles for these devices.
Practical limits of Ni-MH chemistry
The 2200mAh capacity sets a fixed runtime ceiling that cannot be exceeded without a larger pack. Ni-MH cells exhibit self-discharge over weeks of storage, so the battery should be cycled before extended missions. Memory effect can reduce usable capacity if the pack is repeatedly topped up without full discharges. Voltage drops gradually during discharge rather than holding a flat plateau.
Straightforward swap with polarisation key
The pack slides into the radio battery rail and locks with the existing latch; no tools are required. Polarity is keyed by the moulded shell, preventing reverse insertion. The most common issue is seating the pack fully until the latch clicks — an incomplete seat leaves the contacts floating. Old cells that have sat uncharged for months may need two or three full cycles to recover rated capacity.
Highlights
- Replaces original batteries for TAIT TP8100 series radios
- Ni-MH chemistry delivers 7.2V 2200mAh capacity
- 84Wh energy rating supports extended field use
- Compact 85.70 x 47.90 x 69.62mm form fits device bay
- Compatible with OEM part numbers T03-00011-CAAA and TPK-BA-101
Specifications
| Battery Type | Lithium Polymer |
|---|
Questions about this item
Which TAIT radio models does this 7.2V 2200mAh Ni-MH battery replace?
It replaces the original battery in TP8100, TP8110, TP8115, TP8120, TP8135, TP8140, TP9300 and TP9400 radios.
What runtime does the 15.84Wh capacity deliver in a TP8100?
The 15.84Wh pack typically powers a TP8100 for a full duty shift under normal transmit and receive cycles.
Does the battery use a proprietary connector or a standard interface?
It fits the factory battery bay on the listed TAIT models using the original latch and contact layout.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



