NShi
NShi 18V/24V AC Adapter 1000mA 5.5mm Tip Radio Shack 273-1690
Replacement 18V/24V AC adapter delivering 1000mA via a 5.5mm barrel tip for Radio Shack 273-1690
- Compatible with Radio Shack 273-1690 for direct replacement
- Dual 18 V and 24 V AC output suits multiple devices
- 1000 mA current rating powers compatible equipment reliably
- 5 mm barrel tip ensures secure connection
- Built-in over-current, over-voltage and short-circuit protection safeguards hardware
Replacement adapter for Radio Shack 273-1690
This NShi AC adapter replaces the Radio Shack catalog number 273-1690. It delivers 18 VAC or 24 VAC at 1000 mA through a 5.5 mm barrel plug. The unit suits owners of legacy Radio Shack equipment needing a direct substitute.
Verify voltage and connector before ordering
Confirm the device you intend to power accepts 18 VAC or 24 VAC and uses a 5.5 mm outer-diameter barrel jack. Select the correct voltage setting on the adapter to avoid damaging equipment that lacks internal protection. Check the charging port for debris that could prevent proper contact.
Fits legacy Radio Shack devices with barrel input
The adapter plugs straight into hardware designed for the original 2731690 supply. Built-in over-current, over-voltage and short-circuit protection helps safeguard connected gear. No additional cables or converters are required when the target device matches the voltage and 5.5 mm tip specification.
Highlights
- Compatible with Radio Shack 273-1690 for direct replacement
- Dual 18 V and 24 V AC output suits multiple devices
- 1000 mA current rating powers compatible equipment reliably
- 5 mm barrel tip ensures secure connection
- Built-in over-current, over-voltage and short-circuit protection safeguards hardware
Specifications
No published specifications for this item yet.
Questions about this item
Does the package include anything besides the adapter itself?
The box contains only the 18VAC power adapter with its 5.5 mm barrel plug; no extra cables, tips or mounting hardware are included.
Should I select the 18 V or 24 V setting for a device that originally used the Radio Shack 273-1690 supply?
Match the voltage printed on the original equipment; the adapter can deliver either 18 V or 24 V AC, so set it to the value your device requires before plugging it in.
What does the 1000 mA rating mean when the adapter is powering my equipment?
It means the unit can supply up to 1 A of alternating current at the chosen voltage; your device must draw 1 A or less to operate within the adapter’s rated capacity.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



