NShi
NShi 120W AC Adapter 19V 6.15A 5.5mm x 2.5mm laptop replacement part
Replacement 120W 19V 6.15A charger with 5.5mm x 2.5mm tip for MSI GS, GE, GP, GL, CX and PE series laptops
- 120W output keeps high-performance MSI laptops running at full speed
- 19V 6.15A delivery matches original ADP-120MH D specifications exactly
- 5mm x 2.5mm barrel connector fits listed GS, GE, GP, GL, PE and CX models
- 100-240V input allows worldwide use without a voltage converter
- Built-in over-charge, over-current, over-voltage, short-circuit and over-heat protection safeguards the laptop
120W 19V Replacement Adapter
This 120 watt AC adapter delivers 19 volts at 6.15 amps through a 5.5 mm by 2.5 mm barrel connector. It is built as a direct replacement for the original MSI ADP-120MH D and A12-120P1A power supplies used in many GS, GE, GP, GL and PE series gaming laptops. The unit accepts a universal 100 to 240 volt input for worldwide use.
Replaces Lost or Failing OEM Charger
It replaces an original MSI 120 watt brick that has been lost, damaged or no longer holds a charge. The upgrade is worth it when the laptop refuses to charge, shuts down under load or shows a plugged-in not charging message caused by a worn cable or faulty power board. Buyers needing a higher wattage unit for a different model cannot use this adapter.
Plug-and-Play Barrel Connection
Installation is a simple swap: unplug the old brick, connect the barrel tip to the laptop DC jack and plug the IEC C5 cord into the wall. The most common issue is ordering the wrong tip size, so verify the 5.5 by 2.5 mm dimensions against the original before purchase. No driver or BIOS update is required.
Highlights
- 120W output keeps high-performance MSI laptops running at full speed
- 19V 6.15A delivery matches original ADP-120MH D specifications exactly
- 5mm x 2.5mm barrel connector fits listed GS, GE, GP, GL, PE and CX models
- 100-240V input allows worldwide use without a voltage converter
- Built-in over-charge, over-current, over-voltage, short-circuit and over-heat protection safeguards the laptop
Specifications
No published specifications for this item yet.
Questions about this item
What connector size does this 120W adapter use?
The adapter has a 5.5mm x 2.5mm barrel connector that matches the MSI ADP-120MH D specification.
How do I connect the adapter, and what step is often missed?
Plug the barrel tip firmly into the laptop DC jack until it seats, then connect the IEC C7 figure-8 mains lead to the brick before switching on the wall socket.
Which parts of this charger may need replacement over time?
The detachable IEC C7 mains cable can be swapped if damaged; the brick and DC cable are fixed, so the whole unit is replaced if output drops or protection triggers.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



