NPP
NPP HR1234W 12V 34W/cell AGM battery
12 V 34 W/cell AGM sealed lead-acid battery with 204 W total power for UPS backup
- Battery TypeSealed Lead Acid
- 12 V 34 W/cell AGM design powers high-rate UPS loads
- 204 W total output sustains critical equipment during outages
- UL, CE, IEC, ISO 14001, ISO 19001, OHSAS 18000, TLC certified quality
- Maintenance-free VRLA construction eliminates spills and overpressure
- Compact 5.94 × 2.56 × 3.7 in case fits standard battery compartments
AGM battery for UPS backup
The NPP HR1234W is a 12 V sealed lead‑acid battery rated at 34 W per cell and 204 W total. It is built for uninterruptible power supplies, emergency lighting, medical equipment, alarm systems and generators where reliable backup power is required.
Sustained discharge behaviour
The high‑rate design delivers a smooth discharging voltage and a mild discharge platform, maintaining steady output during extended outages rather than only in short bursts. Low self‑discharge of less than 3 % means the cell holds its charge during long periods of standby.
Thermals and safety construction
The case uses non‑conductive ABS plastic that resists shock, vibration, chemicals, weather and heat. AGM and VRLA technology makes the unit maintenance‑free and spill‑proof, eliminating over‑pressure risk while keeping operating temperatures stable under normal load.
Highlights
- 12 V 34 W/cell AGM design powers high-rate UPS loads
- 204 W total output sustains critical equipment during outages
- UL, CE, IEC, ISO 14001, ISO 19001, OHSAS 18000, TLC certified quality
- Maintenance-free VRLA construction eliminates spills and overpressure
- Compact 5.94 × 2.56 × 3.7 in case fits standard battery compartments
Specifications
| Battery Type | Sealed Lead Acid |
|---|
Questions about this item
How much heat does the HR1234W generate when it powers a UPS continuously?
The sealed AGM design uses a low self-discharge rate below 3 % and valve-regulated construction, so it produces minimal heat during normal float operation.
What terminal type does the HR1234W need to connect to my existing UPS?
The unit ships with F2 faston tabs; your UPS must accept that blade width for a direct fit.
Will the 5.94 x 2.56 x 3.7 inch case fit the battery tray of my older APC Back-UPS?
Those dimensions match the standard 12 V 9 Ah footprint, so it slides into the same tray without modification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



