NOYITO AUW328 Alligator Clip to USB Male Cable 3.2 ft Pack of 2

Test adapter for power probing

This NOYITO AUW328 cable converts a standard USB-A male port into a pair of alligator clips for quick voltage checks. Technicians and hobbyists use it to probe 5 V rails on chargers, power banks or development boards without soldering headers. The 3.2 ft length keeps the work area tidy while the red and black clips give instant polarity identification. Two cables are included so both supply and return paths can be monitored at once.

Verify USB-A host and voltage limits

Ensure the device under test presents a regular USB-A receptacle and operates within the 5 V supply envelope defined by the USB specification. The clips are uninsulated metal jaws, so confirm that exposed conductors cannot bridge adjacent pins or components on dense boards. No active circuitry is inside the cable, so it cannot negotiate higher voltages or currents beyond what the host port provides. Do not connect to mains-derived or high-energy sources.

Moulded strain relief and dual-pack utility

Each cable uses a moulded boot where the wire meets the USB plug to resist fatigue from repeated insertion cycles. The alligator jaws feature a spring tension that grips test points, header pins or bare wires without slipping during bench vibration. Red and black insulation on the clips prevents accidental shorts when working in tight enclosures. Having two identical leads allows simultaneous measurement of voltage drop across a connector or cable under load.