NOYITO Alligator Clips to USB Male Test Lead 18AWG 13in Pack of 2
Two 13-inch 18AWG test leads with alligator clips and USB male connectors deliver up to 10 A at 5 V
- TypeUSB
- Connector TypeUsb Male
- ColorBlack&Red
- Cable Length13
- Length13
- Connector Number0
- Handy 13 in reach for bench power testing
- 18 AWG copper handles up to 10 A bursts
- Red and black leads identify polarity at a glance
- Pack of two gives male and female USB ends
- Alligator clips connect quickly to multimeter or supply terminals
Test leads for low-voltage bench work
This pair of cables connects a USB male plug to alligator clips for quick power tapping. One lead carries a male USB connector while the other provides a female USB port, giving flexibility for different test points. The 18 AWG copper conductors are rated for 5 V operation and suit hobbyists, technicians and students who need temporary connections to power supplies or multimeters.
Sustained current handling
The supplier rates the assembly at up to 10 A for short periods but recommends limiting continuous draw to 7 A to avoid overheating the 18 AWG wires. Under prolonged load the insulation and clip springs remain stable within this reduced figure. Users should monitor temperature during extended sessions and avoid pushing the leads to the peak rating for long durations.
Build and everyday use
Red and black insulation identifies positive and negative conductors at a glance, reducing wiring errors on a busy bench. The 33.9 cm length keeps the workspace tidy while still reaching adjacent instruments. Alligator clips open wide enough for standard component leads and terminal posts, and the USB shells are moulded for strain relief during repeated connect-disconnect cycles.
Highlights
- Handy 13 in reach for bench power testing
- 18 AWG copper handles up to 10 A bursts
- Red and black leads identify polarity at a glance
- Pack of two gives male and female USB ends
- Alligator clips connect quickly to multimeter or supply terminals
Specifications
| Brand | NOYITO |
|---|---|
| Model | NOYITO Alligator Clips to USB Male |
| Type | USB |
| Connector Type | Usb Male |
| Color | Black&Red |
| Cable Length | 13 |
| Length | 13 |
| Connector Number | 0 |
| Connector Detail | Usb Male |
| Terminal Gender | Male-to-Male |
| Construction | Copper |
| Features | Low Voltage |
Questions about this item
Will the 18AWG wires get hot if I run 10A through them all day?
The leads are rated for up to 10A, but the supplier recommends limiting continuous use to 7A to avoid excessive heating over long periods.
What power source must I already have to use these test leads?
You need a standard USB-A port or charger that supplies 5V, as the leads are designed for a fixed 5V working voltage.
Can I clip these onto the 5V rail of an older ATX power supply for testing?
Yes, the alligator clips connect directly to exposed terminals, so they work with legacy ATX supplies as long as you stay within the 5V, 7A continuous rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Tripp Lite U324-003-BK USB 3.0 cable USB-A to USB-A 3 ft
- USB
- Black


