Nippon Labs
Nippon Labs CC-BL3 Chair Wheels 75mm Stem 11x22mm 650 lbs 5 pcs
Set of five 75 mm stem-mount chair wheels with 11 x 22 mm stems, double bearings and a 650 lb load rating
- TypeChair Wheel
- MaterialPU/Polyurethane wheel + solid steel bracket
- SpecificationWheel diameter: 3 inch/75mm Stem size :11 x 22mm Bearing: do
- Features[SUITABLE FOR MOST OFFICE CHARI]: The outer layer of casters
- Protects floors with soft polyurethane coating
- Rolls smoothly on carpet and hard surfaces via double bearings
- Supports up to 650 lbs with solid steel bracket
- Fits 11 x 22 mm stem sockets without tools
- Includes five 75 mm swivel casters per set
Chair Wheels 75 mm Stem 11×22 mm
Nippon Labs CC-BL3 wheels replace standard office-chair casters with a 75 mm polyurethane tread on a solid steel bracket. The 11×22 mm stem fits most common sockets and each wheel carries up to 650 lbs. A set of five swivel casters refreshes a full chair without tools.
Silent Rolling on Mixed Floors
Soft polyurethane coating protects hardwood, laminate, vinyl, tile and carpet from scratches while the double-bearing hub keeps motion smooth and quiet. Powder-coated steel resists corrosion during daily rolling across varied surfaces.
Five-Piece Tool-Free Upgrade
The pack supplies five identical casters so every leg matches in height and roll resistance. Press-fit stems install in seconds by pulling the old wheels and pushing the new ones home; IKEA chairs are not compatible.
Highlights
- Protects floors with soft polyurethane coating
- Rolls smoothly on carpet and hard surfaces via double bearings
- Supports up to 650 lbs with solid steel bracket
- Fits 11 x 22 mm stem sockets without tools
- Includes five 75 mm swivel casters per set
Specifications
| Brand | Nippon Labs |
|---|---|
| Model | CC-BL3 |
| Type | Chair Wheel |
| Material | PU/Polyurethane wheel + solid steel bracket |
| Specification | Wheel diameter: 3 inch/75mm Stem size :11 x 22mm Bearing: double bearing Load capacity : Up to 650 lbs. Surface treatment: powder coating Mounting Type : Stem Mount Package list: 5 pcs swivel without brake /set |
| Features | [SUITABLE FOR MOST OFFICE CHARI]: The outer layer of casters is made of rubber-like plastic material coated with soft polyurethane. This soft shell not only prevents damage to your floor, but also rolls freely on the carpet. Our desk chair wheels replacement will never scratch, smudge or damage your floors. Of course, if the chair cushion must be used, the casters can also work well. Enjoy carefree and safe glide on wood, hardwood, laminate, vinyl, tile and carpet floors throughout the day. [EASY TO INSTALL & STURDY ]: Mounting of the casters is very simple - without any tools needed |
| Shipping weight | 1.59 kg |
| Package size | 254 × 203 × 76 mm |
Questions about this item
How do I install the 11 x 22mm stem wheels on my office chair?
Pull the old wheels straight out of the chair base sockets, then press the new stems firmly in until they seat; no tools are required, but the stems will not fit IKEA chair sockets.
What maintenance will the double bearing casters need over time?
The sealed double bearings are maintenance-free; if rolling becomes stiff or noisy, simply replace the affected wheel — each wheel is a sealed unit with no serviceable parts inside.
At what load does the 650 lbs capacity limit become a concern during daily use?
The 650 lbs rating applies to the full set of five wheels; sustained loads approaching that total will increase rolling resistance and accelerate wear on the polyurethane tread and steel brackets.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



