We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue USB 3.0 A male to A female extension cable 10 ft

Nippon Labs

Nippon Labs 50USB3-AAF-10 USB 3.0 A Male to A Female Extension Cable 10 ft Blue

SKU CH-BFX4-XSPMM MPN 50USB3-AAF-10

Extends a USB 3.0 connection by 10 ft with up to 5Gbps transfer speed and backward compatibility to USB 2.0 and 1.1

  • TypeExtension Cables
  • Connector TypeUSB A to USB A
  • ColorBlue
  • Cable Length10 ft.
  • Connector Number2
  • Connector DetailUSB 3.0 A Male to A Female

Cable Length 10 Feet

  • Extends USB 3.0 reach by ten feet
  • Transfers data at up to 5Gbps SuperSpeed
  • Works with USB 3.0, 2.0 and 1.1 devices
  • Nickel-plated connectors resist corrosion for reliable contact
  • PVC jacket protects conductors during everyday use

Extend USB 3.0 Connections by Ten Feet

This Nippon Labs extension cable adds ten feet to an existing USB 3.0 link using a male Type-A plug on one end and a female Type-A port on the other. It supports the USB 3.0 SuperSpeed specification for transfer rates up to 5Gbps and remains backward compatible with USB 2.0 and 1.1 devices. The connectors are nickel-plated and the jacket is PVC.

Suited for Peripherals That Need Extra Reach

The cable works well for keyboards, mice, printers, external drives or hubs that sit farther from the host than the stock cable allows. It is not intended for charging-only applications that require a USB-C or Micro-B connector, nor for situations where a ten-foot run would exceed the practical length limit for reliable SuperSpeed signalling.

Simple Plug-and-Play Installation

Connect the male end to the computer or hub and plug the existing device cable into the female end; no drivers or configuration are required. The most common issue is signal degradation if the combined cable length becomes excessive, so keep the total run as short as the layout permits.

Highlights

  • Extends USB 3.0 reach by ten feet
  • Transfers data at up to 5Gbps SuperSpeed
  • Works with USB 3.0, 2.0 and 1.1 devices
  • Nickel-plated connectors resist corrosion for reliable contact
  • PVC jacket protects conductors during everyday use

Specifications

BrandNippon Labs
Model50USB3-AAF-10
TypeExtension Cables
Connector TypeUSB A to USB A
ColorBlue
Cable Length10 ft.
Connector Number2
Connector DetailUSB 3.0 A Male to A Female
Terminal GenderMale to Female
Speedup to 5Gbps
FeaturesUSB 3.0 A Male to A Female cable
Typically used to extend the USB 3.0 connection
Compatible with USB Rev3.0/2.0/1.1
Leverages USB 3.0 SuperSpeed technology to increase transfer rates up to 5Gbps, 10 x faster than existing USB 2.0 technology
Super High-Speed
Shipping weight0.18 kg
Package size165 × 127 × 25 mm

Other versions of this model

2 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What existing cable do I need to plug into the A female end of this 10 ft extension?

You need a standard USB 3.0 A male cable — the same type that ships with most USB 3.0 peripherals — to connect your device to the female port on this extension.

Will this cable still pass data if I keep my older USB 2.0 hub in the chain?

Yes, the cable is compatible with USB Rev 2.0 and 1.1, so it will carry data at the hub's slower speed without any extra configuration.

How can I confirm the link is running at SuperSpeed after I connect everything?

Open your OS device manager or system profiler and check that the attached device shows a 5 Gbps connection speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.