We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue USB 3.0 A male to A male cable, 1 ft

Nippon Labs

Nippon Labs 20USB3-1MMBLU-G 1ft Blue USB 3.0 A Male to A Male Cable

SKU CH-Z1HJ-5MZKW MPN 20USB3-1MMBLU-G

A 1 ft blue USB 3.0 cable with gold-plated male-to-male connectors for linking USB-A devices at up to 4.8 Gbps

  • TypeUSB 3.0
  • Connector TypeUSB A to USB A
  • ColorBlue
  • Cable Length1 ft.
  • Connector Number2
  • Terminal GenderMale to Male
  • SuperSpeed data transfer up to 4.8 Gbps with USB 3.0
  • Double-shielded conductor cuts EMI/RFI for reliable signals
  • Gold-plated connectors resist corrosion for lasting contact
  • Backward compatible with USB 2.0 and 1.1 devices
  • Compact 1 ft length suits tight desktop setups

Purpose and fit

This one-foot USB 3.0 Type A male-to-male cable connects a printer, keyboard, mouse or similar peripheral directly to a computer. The short length keeps desk clutter low for fixed-position setups. Gold-plated contacts resist oxidation for reliable mating cycles. It is not suited for linking two host controllers or bridging long distances between devices.

Deciding specification

The cable implements USB 3.0 with a 28 AWG signal pair and 24 AWG power conductors, rated for SuperSpeed transfer up to 4.8 Gbps. Double shielding suppresses EMI and RFI so the link stays clean in electrically noisy environments. Backward compatibility with USB 2.0 and 1.1 ports is maintained without extra adapters.

Capacity and headroom

At 4.8 Gbps the link comfortably handles external hard drives, high-resolution scanners and multi-channel audio interfaces. Bandwidth runs out when several SuperSpeed devices share a single host controller or when cable runs exceed the one-foot limit. The short reach also prevents daisy-chaining multiple peripherals without a powered hub.

Highlights

  • SuperSpeed data transfer up to 4.8 Gbps with USB 3.0
  • Double-shielded conductor cuts EMI/RFI for reliable signals
  • Gold-plated connectors resist corrosion for lasting contact
  • Backward compatible with USB 2.0 and 1.1 devices
  • Compact 1 ft length suits tight desktop setups

Specifications

BrandNippon Labs
Model20USB3-1MMBLU-G
TypeUSB 3.0
Connector TypeUSB A to USB A
ColorBlue
Cable Length1 ft.
Connector Number2
Terminal GenderMale to Male
SpecificationsConnector A: USB 3.0 Type A Male
Connector B: USB 3.0 Type A Male
Conductor: Super High Speed USB 3.0 Cable, 28 AWG. x 3P + 24 AWG. x 2C
Shipping weight0.23 kg
Package size127 × 51 × 25 mm

Questions about this item

What does the 4.8 GBps rating actually deliver when I plug this cable into a USB 3.0 port?

The cable supports the USB 3.0 SuperSpeed specification up to 4.8 GBps; real-world throughput depends on the host controller, device and file sizes, but the conductor is built to carry the full signalling rate.

Which USB standard does the A-to-A connector follow, and what does that limit?

Both ends are USB 3.0 Type A Male, so the link is capped at the USB 3.0 5 Gbps signalling rate and will fall back to USB 2.0 or 1.1 if either port is older.

Will the 1 ft length and 28 AWG data pairs fit a typical desktop-to-peripheral run?

At 1 ft the cable is designed for close-range links such as a printer or dock sitting beside the PC; the 28 AWG data pairs and 24 AWG power cores are rated for the USB 3.0 current allowance at this length.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.