We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black bayonet-mount lens hood for NIKKOR Z 24-105mm f/4-7.1

Nikon Inc

Nikon HB-93B Lens Hood for NIKKOR Z 24-105mm f/4-7.1 camera accessory

SKU CH-PDRW-WWHRW

A dedicated bayonet-mount hood that blocks stray light to reduce flare and ghosting while shielding the front element of the NIKKOR Z 24-105mm f/4-7.1 lens

  • Reduces glare and flare for clearer images
  • Protects the front element from bumps and scratches
  • Built from tough materials for long service life
  • Bayonet mount clicks on and off in seconds
  • Designed specifically for the NIKKOR Z 24-105mm f/4-7.1 lens

Dedicated hood for NIKKOR Z 24-105mm

The Nikon HB-93B is a bayonet-mount lens hood engineered exclusively for the NIKKOR Z 24-105mm f/4-7.1 VR lens. It blocks stray light that causes flare and ghosting, helping to preserve contrast and colour saturation across the zoom range. Photographers who use this specific Z-mount lens gain a direct improvement in optical performance. It is not for owners of other NIKKOR Z lenses or F-mount models.

Glare reduction and physical shielding

The accessory changes the shooting experience by cutting unwanted reflections from strong side or back lighting, which otherwise lower image quality. At the same time, the rigid barrel acts as a sacrificial barrier, absorbing knocks and shielding the front element from dust, moisture and fingerprints during handling. Both benefits are active whenever the hood is mounted, without any setting changes or power requirements.

Bayonet mount and reversible storage

The hood locks to the lens via a dedicated bayonet interface that matches the 24-105mm f/4-7.1 thread geometry, so it cannot be fitted to lenses with different diameters or mount keys. It adds length to the front of the lens when in shooting position, which may restrict access in tight spaces or when using certain filter systems. Reversing the hood for storage restores the compact profile but removes the optical and protective functions until it is remounted.

Highlights

  • Reduces glare and flare for clearer images
  • Protects the front element from bumps and scratches
  • Built from tough materials for long service life
  • Bayonet mount clicks on and off in seconds
  • Designed specifically for the NIKKOR Z 24-105mm f/4-7.1 lens

Specifications

No published specifications for this item yet.

Questions about this item

Does the HB-93B hood need any maintenance or replacement parts over time?

The hood is a single-piece bayonet accessory with no moving parts, filters or consumables, so it requires no scheduled maintenance or replacement components.

What is the first limitation you hit when using the HB-93B on the 24-105mm f/4-7.1 all day?

The only practical limit is vignetting if the hood is left mounted at the 24 mm wide end; it is designed for the full zoom range but must be removed or reversed at the shortest focal length.

Does the HB-93B add noticeable heat, noise or power draw during extended shooting?

The hood is a passive plastic component with no electronics, motor or power connection, so it generates no heat, makes no noise and draws zero power.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.