We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper 90-degree close rough elbow fitting 1/2 inch nominal size

Nibco, Inc.

Nibco, Inc. U607 1/2" Copper 90 Degree Close Rough Elbow trap

SKU CH-11TP-4K2CK MPN U607

A 90-degree close-rough elbow made of wrot copper with C x C connections for 1/2-inch tube, rated to 722 psi at 100 degrees F and a temperature range of -20 to 400 degrees F

  • TypeDrain Components
  • 90-degree close rough elbow directs flow efficiently
  • Wrot copper construction resists corrosion for long service life
  • C x C sweat connection fits 1/2 in nominal tube size
  • Rated 722 psi at 100 °F for high-pressure confidence
  • Meets ASME/ANSI B 16.22 standard for quality assurance

Copper 90-Degree Close Rough Elbow

The Nibco U607 is a wrot copper elbow designed for 1/2 inch nominal tube with a 5/8 inch outside diameter. It provides a C x C solder connection for changing flow direction in plumbing systems. This fitting suits installers working on residential or commercial water, gas or HVAC lines. It meets ASME/ANSI B 16.22 standards for material and dimensions.

Pressure headroom and temperature limits

Rated to 722 psi at 100 degrees F, the elbow handles typical supply pressures with a wide safety margin. The operating range spans -20 degrees to 400 degrees F, covering chilled water, hot water and low-pressure steam. Copper construction resists corrosion but is not suited for acidic or high-chloride environments without additional protection. Installers must verify local code acceptance for the intended service.

Solder-joint C x C connection

The fitting requires soldering with compatible flux and alloy to form a permanent, leak-free joint. No threads, press tools or mechanical couplings are used with this model. Builders needing a threaded, press-fit or push-to-connect transition cannot use this part. Always confirm tube size and connection type before purchase.

Highlights

  • 90-degree close rough elbow directs flow efficiently
  • Wrot copper construction resists corrosion for long service life
  • C x C sweat connection fits 1/2 in nominal tube size
  • Rated 722 psi at 100 °F for high-pressure confidence
  • Meets ASME/ANSI B 16.22 standard for quality assurance

Specifications

TypeDrain Components
BrandNibco
ModelU607 1/2

Questions about this item

Will this 1/2" copper elbow solder cleanly to my existing 5/8" OD tubing?

Yes — the C×C socket is sized for 1/2" nominal tube with a 5/8" outside diameter, so it fits standard copper pipe of that size.

How can I verify the joint holds pressure after soldering?

The fitting is rated to 722 psi at 100 °F; pressurise the line and check for leaks at that pressure to confirm a sound joint.

Does the package include flux or solder, or must I buy them separately?

Only the wrot-copper elbow is supplied; flux and solder are not included and must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.