We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three sweat connections, 1-1/4 by 3/4 by 3/4 inches

Nibco, Inc.

Nibco, Inc. Reducing Tee Wrot Copper 1-1/4" x 3/4" x 3/4" C x C x C

SKU CH-R5EH-CF6X4

Reducing tee joins 1-1/4" and 3/4" copper tubes with sweat connections rated to 351 psi at 200°F

  • Reduces pipe diameter from 1-1/4 in to 3/4 in for flexible plumbing layouts
  • Wrot copper construction meets ASTM B75 alloy C12200 for corrosion resistance
  • Rated 351 psi at 200 °F for reliable high-pressure service
  • Certified to NSF/ANSI 61 Annex G and ASME B16.22 for potable water safety
  • Operates from -20 °F to 400 °F across heating and cooling systems

Reducing Tee 1-1/4" x 3/4" x 3/4

This wrot copper reducing tee connects three tube sections using C x C x C solder joints. It joins a 1-1/4 inch run to two 3/4 inch branches in plumbing and mechanical piping systems. The fitting meets ASTM B75 alloy C12200 composition requirements.

Suits standard solder assemblies

Installers who need a tee that steps down from a larger main line to smaller branch lines will use this fitting. It is certified to NSF/ANSI 61 Annex G and ASME B 16.22 for potable water and general plumbing. Builders requiring press, push-fit or threaded connections cannot use this part.

Rated 351 psi at 200°F

The fitting withstands a maximum working pressure of 351 psi at 200 degrees Fahrenheit and operates across a temperature range of -20 to 400 degrees Fahrenheit. This pressure-temperature rating determines whether the tee is appropriate for the intended service conditions.

Highlights

  • Reduces pipe diameter from 1-1/4 in to 3/4 in for flexible plumbing layouts
  • Wrot copper construction meets ASTM B75 alloy C12200 for corrosion resistance
  • Rated 351 psi at 200 °F for reliable high-pressure service
  • Certified to NSF/ANSI 61 Annex G and ASME B16.22 for potable water safety
  • Operates from -20 °F to 400 °F across heating and cooling systems

Specifications

BrandNibco

Questions about this item

Does the 351 psi rating at 200 °F mean the tee runs hot in continuous service?

The fitting is passive copper with no moving parts or power draw, so it generates no heat and makes no noise during all-day operation.

What copper tube sizes must I already have to sweat this 1-1/4" x 3/4" x 3/4" tee into my line?

You need straight lengths of 1-1/4 in, 3/4 in, and 3/4 in copper tube plus flux and solder for the three C x C x C sweat connections.

Will this ASTM B75 C12200 tee join cleanly to the older copper pipe already in my walls?

Yes, the wrought copper alloy matches standard plumbing tube, so it solders directly to existing copper of the same nominal sizes without adapters.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.