We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze P-trap with sweat cup ends, 1 1/2 inch copper tube size

Nibco, Inc.

Nibco, Inc. 885 P-Trap Bronze 1 1/2 in 466 psi

SKU CH-BXGH-TR569

Bronze P-trap for 1 1/2 in copper tube, sweat connections, rated 466 psi at 200 °F

  • ColorTransparent
  • Bronze construction resists corrosion for long service life
  • Sweat cup connections fit 1 1/2 in copper tube directly
  • Rated 466 psi at 200 °F for demanding pressure systems
  • Withstands temperatures up to 400 °F in non-potable applications
  • Meets ASME B16.23 and ASTM B584 standards for quality assurance

P-Trap for Air and Non-Potable Water Lines

This bronze P-trap connects copper tubing in plumbing systems carrying air or non-potable water. Sweat fittings on both ends join 1 1/2 inch copper tube sizes with a 1 5/8 inch outer diameter. The fitting meets ASME B16.23 and ASTM B584 standards for material and dimensions. It suits installers who need a reliable trap for non-drinking-water applications.

Rated 466 psi at 200 Degrees F

The maximum operating pressure is 466 psi at 200 degrees Fahrenheit, which is the key figure for selecting this component. Systems that exceed this pressure at that temperature require a different fitting. The bronze body conforms to ASTM B584 for consistent mechanical properties. This rating defines the safe operating envelope for the trap.

Withstands 400 Degrees F Continuous Exposure

The fitting tolerates a maximum operating temperature of 400 degrees Fahrenheit during sustained service. Bronze construction resists thermal cycling without the degradation seen in lower-melting-point alloys. Joint integrity is maintained through repeated heating and cooling cycles. It is not intended for potable water systems or pressures above the rated limit.

Highlights

  • Bronze construction resists corrosion for long service life
  • Sweat cup connections fit 1 1/2 in copper tube directly
  • Rated 466 psi at 200 °F for demanding pressure systems
  • Withstands temperatures up to 400 °F in non-potable applications
  • Meets ASME B16.23 and ASTM B584 standards for quality assurance

Specifications

ColorTransparent
BrandNIBCO

Questions about this item

What does the 466 psi rating mean when the trap is installed?

The trap is rated for a maximum operating pressure of 466 psi at 200 degrees F, which is the upper limit for safe use in the system.

Which standards govern the sweat fitting interface and what do they cap?

The fitting meets ASME B16.23 and ASTM B584, which define the dimensions and material requirements for the sweat connections.

What pipe size and connection type are needed to mount this P-trap?

It requires 1 1/2 inch copper tube with sweat cup connections on both ends for soldered installation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.