We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze 90-degree elbow trap with sweat and FNPT ends

Nibco, Inc.

Nibco, Inc. 7073LF-34 90° Elbow Trap 3/4 in C x FNPT Bronze

SKU CH-EQAH-V5D0N MPN 7073LF-34

Low-lead bronze 90° elbow with sweat and FNPT ends, rated 466 psi at 200 °F for potable water

  • TypeDrain Components
  • MaterialHAWA
  • Low-lead bronze meets NSF/ANSI 372 and NSF/ANSI 61 for potable water
  • 90-degree elbow connects 3/4 in copper tube to 3/4 in FNPT thread
  • Rated to 466 psi and 200 Degrees F for reliable pressure and temperature performance
  • Cast bronze body conforms to ASME B 16.18 and ISO 9001 quality standards
  • Sweat cup on one end and female NPT on the other simplifies installation

90° Bronze Elbow for Potable Water

This 3/4 inch copper-to-FNPT elbow directs flow in residential and commercial plumbing. The lead-free bronze body meets NSF/ANSI 61 and 372 for safe drinking-water contact. It is suited for installers who need a compact, code-compliant change of direction.

Verify Copper Tube Size and Thread Compatibility

Confirm that the existing line uses 3/4 inch copper tube with a 7/8 inch outside diameter before sweating the cup end. The opposite port accepts 3/4 inch FNPT threads, so mating fittings must match that pipe size and taper. The fitting is restricted from sale in certain states; check local regulations before ordering.

Rated for Continuous Pressure and Temperature

The bronze construction withstands up to 466 psi at 200 degrees Fahrenheit, maintaining seal integrity under sustained system pressure. Compliance with ASME B16.18 and ISO 9001 manufacturing standards supports reliable long-term performance in hot and cold potable-water circuits.

Highlights

  • Low-lead bronze meets NSF/ANSI 372 and NSF/ANSI 61 for potable water
  • 90-degree elbow connects 3/4 in copper tube to 3/4 in FNPT thread
  • Rated to 466 psi and 200 Degrees F for reliable pressure and temperature performance
  • Cast bronze body conforms to ASME B 16.18 and ISO 9001 quality standards
  • Sweat cup on one end and female NPT on the other simplifies installation

Specifications

TypeDrain Components
MaterialHAWA
BrandNibco
Model7073LF-34

Questions about this item

Does the 7073LF-34 elbow ship with solder or thread sealant, or do I buy those separately?

The fitting is supplied as a single bronze elbow; solder for the 3/4 in copper sweat end and thread sealant for the 3/4 in FNPT end must be purchased separately.

When should I choose the 3/4 in C x FNPT version instead of another size or connection type?

Select this model when joining 3/4 in copper tubing to a 3/4 in female NPT thread in a potable-water system that requires a 90-degree turn.

What does the 466 psi pressure rating mean once the elbow is installed in a hot-water line?

It certifies the joint will hold up to 466 psi at temperatures up to 200 Degrees F, meeting ASME B 16.18 and NSF/ANSI 61 for potable water.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.