We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper reducing tee with three sweat connections, two larger ends and one smaller branch

Nibco, Inc.

Nibco, Inc. 611RR 2-1/2 x 2 x 2-1/2 Copper Reducing Tee

SKU CH-M2DX-R4YDN

Reducing tee connects 2-1/2 inch, 2 inch and 2-1/2 inch copper tubes with sweat fittings for potable water

  • Reduces pipe size while maintaining flow
  • Copper construction resists corrosion in potable water
  • Sweat connections create permanent leak-free joints
  • Reducing tee joins three copper tubes
  • Wrot copper material handles pressure reliably

Copper Reducing Tee 2-1/2" x 2" x 2-1/2

This Nibco wrot-copper sweat fitting joins three copper tubes in a reducing tee configuration. The run ports accept 2-1/2 inch tube (2-5/8 inch OD) while the branch port accepts 2 inch tube (2-1/8 inch OD). All connections are cup-type for soldered joints in potable water systems.

For installers joining unequal copper lines

It suits plumbers and contractors who need a sweat-fitted reducing tee for copper pipe. It is not for buyers who require threaded, press-fit or push-to-connect ends. It is not for systems that specify a different branch size or a non-copper fitting material.

Reducing branch 2 inch on 2-1/2 inch run

The defining specification is the reducing branch: the tee reduces from a 2-1/2 inch run to a 2 inch branch while keeping copper cup connections throughout. This single geometry determines whether the fitting matches the piping layout.

Highlights

  • Reduces pipe size while maintaining flow
  • Copper construction resists corrosion in potable water
  • Sweat connections create permanent leak-free joints
  • Reducing tee joins three copper tubes
  • Wrot copper material handles pressure reliably

Specifications

BrandNIBCO

Questions about this item

Will the 2-1/2 inch ends of this tee connect to the 2-1/2 inch copper pipe already in my system?

Yes, the 2-1/2 inch copper tube size ends match 2-1/2 inch nominal pipe, and the 2-5/8 inch outer diameter matches standard 2-1/2 inch copper tubing.

How can I confirm the sweat joints on this reducing tee are properly sealed after soldering?

Pressurise the line with water and inspect each cup connection for leaks; a sound sweat joint shows no seepage at the 2-1/2 inch and 2 inch interfaces.

Does the box include solder, flux or the 2 inch copper pipe for the centre branch?

The box contains only the wrot copper reducing tee; solder, flux and any 2 inch or 2-1/2 inch pipe must be purchased separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.