We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small copper T-shaped tee fitting with three solder ends, shiny metallic finish

Nibco, Inc.

Nibco, Inc. 611BH Copper Bullhead Tee 1/8 x 1/8 x 1/4

SKU CH-8SEV-D2CWS

A copper bullhead tee joins 1/8 in., 1/8 in. and 1/4 in. tubes, rated to 729 psi at 200 °F and certified to NSF/ANSI 61 Annex G

  • Copper construction resists corrosion per ASTM B75 C12200
  • Bullhead tee splits 1/8 in lines into 1/4 in outlet
  • Rated 729 psi at 200 °F for high-pressure systems
  • Certified to NSF/ANSI 61 Annex G for potable water
  • Meets ASME B16.22 and MSS SP-104/109 standards

Copper Bullhead Tee for plumbing systems

This NIBCO 611BH fitting joins three copper tubes in a tee configuration with a larger branch outlet. It suits installers working on residential or commercial water, gas or medical-gas piping where a 1/4 inch branch feeds from two 1/8 inch runs.

Wrot copper construction with sweat connections

The fitting is made from ASTM B75 alloy C12200 wrought copper and uses C x C x C solder joints. Rated to 729 psi at 200 °F and a temperature range of -20 °F to 400 °F, it meets NSF/ANSI 61 Annex G, ASME B16.22, MSS SP-104, MSS SP-109 and NFPA 99 medical-gas requirements.

Branch size determines compatibility

The bullhead layout provides a 1/4 inch nominal branch with two 1/8 inch run ports. Builders needing equal-sized ports or a smaller branch must select a different fitting pattern.

Highlights

  • Copper construction resists corrosion per ASTM B75 C12200
  • Bullhead tee splits 1/8 in lines into 1/4 in outlet
  • Rated 729 psi at 200 °F for high-pressure systems
  • Certified to NSF/ANSI 61 Annex G for potable water
  • Meets ASME B16.22 and MSS SP-104/109 standards

Specifications

BrandNIBCO

Questions about this item

What pressure and temperature does the C x C x C copper bullhead tee handle?

The fitting is rated for 729 psi at 200 °F and operates from -20 °F to 400 °F.

What tube sizes and outside diameters does this bullhead tee connect?

It joins 1/8 in, 1/8 in and 1/4 in nominal tubes with 1/4 in, 1/4 in and 3/8 in outside diameters.

How do you solder the wrot copper tee without damaging the joint?

Clean and flux all three C x C sockets, apply heat evenly, feed solder until it flows around each cup, then let cool without moving the pipe.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.